描述了一種光纖傳感器輸出特性測試系統,該系統通過調制和補償技術大大改善了系統
的穩定性,介紹了補償?shù)姆椒ê驼{(diào)制的措施,并進行了定點測試和全程測試的實驗。結果表明,采用的調制和補償技術可大大減小光源強度變化和外界干擾光的影響,提高測試系統的穩定性。
關鍵詞:光纖;傳感器;補償;調制;穩定性
Abstract :The output characteristic measuring system of an intensity - type fiber optic sensor is described. Stability of the system can be improved by means of modulation and compensation techniques. The concrete compensation method and modulation measures are presented ,and the experiments with fixed - points and moving - points are performed. Results
show that negative effects caused by light source power fluctuation and environmental light variation can be greatly reduced by means of modulation and compensation ,thus high stability can be achieved.
Key Words :Optical Fiber ;Sensor ;Compensation ;Modulation ;Stability