色哟哟视频在线观看-色哟哟视频在线-色哟哟欧美15最新在线-色哟哟免费在线观看-国产l精品国产亚洲区在线观看-国产l精品国产亚洲区久久

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
電子發燒友網>電子資料下載>類型>參考設計>CN0204軟件用戶指南

CN0204軟件用戶指南

2021-04-09 | pdf | 692.8KB | 次下載 | 2積分

資料介紹

This version (03 Jan 2021 21:59) was approved by Robin Getz.The Previously approved version (21 Sep 2017 18:51) is available.Diff

CN0204 Evaluation Board Guide

Overview

CN0204 is a full function, high voltage (up to 44 V), flexible, programmable analog output solution that meets most requirements for programmable logic controller (PLC) and distributed control system (DCS) applications. It provides all the typical voltage and current output ranges with 16-bit resolution and no missing codes, 0.05% linearity, and less than 0.2% total output error. Furthermore, it also contains key features for industrial applications, such as on-chip output fault detection, CRC checking to prevent packet error (PEC), and flexible power-up options, making it an ideal choice for robust industrial control systems. No external precision resistors or calibration routines are needed to maintain consistent performance in mass production, thereby making it ideal for PLC or DCS modules.

The AD5751 is a single channel, low cost, precision voltage/ current output driver developed to meet the requirements of industrial process control applications. The AD5751 is specified to operate with a power supply range from 10.8 V to 55 V, and the voltage output can be up to 44 V. The voltage output range can be programmed for the standard output ranges and 20% overrange settings for PLC and DCS applications: 0 V to 5 V, 0 V to 10 V, 0 V to 6 V, 0 V to 12 V. In addition, two high voltage output ranges are also provided: 0 V to 40 V and 0 V to 44 V. The current output, which is provided on a separate pin, can be programmed for the standard ranges of 4 mA to 20 mA, 0 mA to 20 mA, 0 mA to 24 mA. There is also a 2% overrange setting which provides 3.92 mA to 20.4 mA, 0 mA to 20.4 mA, and 0 mA to 24.5 mA. The voltage and current output pins can be tied together to configure the end system as a single-channel output if desired.

The AD5662 is a low power (0.75 mW typical @ 5 V), rail-to-rail output, 16-bit nanoDAC? device. The AD5662 guarantees ±1 LSB DNL under a wide range of reference voltages that can vary from 0.75 V to the VDD supply. In the circuit of Figure 1, the AD5751 and AD5662 operate from a common reference source of 4.096 V, provided by the ADR444.

The ADuM1301 and ADuM5401 provide all the necessary signal isolation between the microcontroller and the analog signal chain. They are both based on the iCoupler? technology. Additionally, the ADuM5401 provides an isolated 5 V power supply for all the circuit in the secondary side.

Devices for PLC and DCS applications generally need ESD protection and overvoltage protection much higher than the formal recommended specifications. Thus, external 64 V, 1500 W transient voltage suppressors (TVS); a 50 mA, 30 V PolySwitch; and power Schottky diodes are built into the EVAL-CN0204-SDPZ circuit board to provide higher voltage ESD protection, 50 mA overcurrent, and 64 V overvoltage protection.


Required Equipment


General Setup

Block Assignments

  • The EVAL-CN0204-SDPZ (CN0204 Board) connects to the EVAL-SDP-CB1Z (SDP-B Board) via the 120-Pin Connector (SDP CONN)
  • The EVAL-SDP-CB1Z (SDP-B Board) connects to the PC via the USB cable
  • Terminal block CN1 is the current output
  • Terminal block CN2 is the +6 V power supply input
  • Terminal block CN3 is the +/- 50 V power supply input
    • Connect the +25 V power supply to the 12-50 VIN terminal
    • Connect the -25 V power supply to the GND_ISO terminal
  • Terminal block CN4 is the voltage output
    • Optionally if JP3 is open, the output voltage feedback can be configured by connecting VSENSE+ to a selected node in the load circuit

Power on the (EVAL-CN0204-SDPZ) through the triple output power supply and the (SDP-B Board) through the PC SEPARATELY before connecting the two boards together.

Jumper Settings

See the table in the image below for the jumper settings. Values in red are the default settings for the EVAL-CN0204-SDPZ.


Installing the Evaluation Software

  1. Extract the file CN0204 Evaluation Software and open setup.exe

    NOTE: It is recommended that you install the CN0204 Evaluation Software to the default directory path C:/Program Files (x86)/Analog Devices/CN0204/ and all National Instruments products to C:/Program Files/National Instruments/


  2. Press Next to view the installation review page
  3. Press Next to start the installation
  4. Upon completion of the installation of the CN0204 Evaluation Software, the installer for the ADI SDP Drivers will execute.

    NOTE: It is recommended that you close all other applications before clicking “Next”. This will make it possible to update relevant system files without having to reboot your computer.


  5. Press Next to set the installation location for the SDP Drivers

    It is recommended that you install the drivers to the default directory path
    C:/Program Files/Analog Devices/SDP/Drivers


  6. Press Next to install the SDP Drivers. When prompted by Windows Security, just press Install
  7. Press Finish to complete the installation

Using the Evaluation Software

Main Window

  • Title Bar (Highlighted Violet)
  • System Configuration (Highlighted Orange)
    • Connector
      • Selects which 120-pin connection of the SDP-B Board to use
    • SCLK (Hz)
      • Sets the SPI clock frequency used by the evaluation board
  • AD5751 Configuration (Highlighted Blue)
    • JP1 Configuration
      • Sets the SPI address of the AD5750-1 based on the position of JP1
    • Range Select
      • Sets the voltage/current output range
    • Toggle CLEAR
      • Sets the outputs to the zero/midscale voltage value or the minimum value of the selected current range
  • AD5751 Error Indicator (Highlighted Yellow)
    • Vout Fault
      • There is a short circuit on the VOUT pin
    • Iout Fault
      • There is an open circuit on the IOUT pin
    • Over Temp
      • The AD5751 core temperature exceeds 150 °C
    • PEC Error
      • CRC-8 error checking detected an interface error
  • Output Setting Highlighted Red
    • Write AD5662
      • Writes the hexadecimal value in the left field to the AD5662 output voltage
    • Reset AD5751
      • Resets the AD5751 to its power-on state
  • Quit
    • Exits the software application

Running the System

  1. Open the CN0204.exe application from the default installation location.
  2. Set the correct connector and SCLK settings for the board in the System Configuration section.
  3. Click the Connect Button
  4. Upon successful connection, select the desired range of output on the Range Select drop-down menu.
  5. Input a hex value equivalent of the desired output level in the Output Setting section.
  6. Click Write AD5662
  7. Click Disconnect Button if finished.

Schematic, PCB Layout, Bill of Materials

EVAL-CN0204-SDPZ Design & Integration Files

  • Schematics
  • PCB Layout
  • Bill of Materials
  • PADS project

End of Document

評論

查看更多

下載排行

本周

  1. 1AN-1267: 使用ADSP-CM408F ADC控制器的電機控制反饋采樣時序
  2. 1.41MB   |  3次下載  |  免費
  3. 2AN158 GD32VW553 Wi-Fi開發指南
  4. 1.51MB   |  2次下載  |  免費
  5. 3AN148 GD32VW553射頻硬件開發指南
  6. 2.07MB   |  1次下載  |  免費
  7. 4AN-1154: 采用恒定負滲漏電流優化ADF4157和ADF4158 PLL的相位噪聲和雜散性能
  8. 199.28KB   |  次下載  |  免費
  9. 5AN-960: RS-485/RS-422電路實施指南
  10. 380.8KB   |  次下載  |  免費
  11. 6EE-249:使用VisualDSP在ADSP-218x DSP上實現軟件疊加
  12. 60.02KB   |  次下載  |  免費
  13. 7AN-1111: 使用ADuCM360/ADuCM361時的降低功耗選項
  14. 306.09KB   |  次下載  |  免費
  15. 8AN-904: ADuC7028評估板參考指南
  16. 815.82KB   |  次下載  |  免費

本月

  1. 1ADI高性能電源管理解決方案
  2. 2.43 MB   |  450次下載  |  免費
  3. 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
  4. 5.67 MB   |  138次下載  |  1 積分
  5. 3基于STM32單片機智能手環心率計步器體溫顯示設計
  6. 0.10 MB   |  130次下載  |  免費
  7. 4使用單片機實現七人表決器的程序和仿真資料免費下載
  8. 2.96 MB   |  44次下載  |  免費
  9. 5美的電磁爐維修手冊大全
  10. 1.56 MB   |  24次下載  |  5 積分
  11. 6如何正確測試電源的紋波
  12. 0.36 MB   |  18次下載  |  免費
  13. 7感應筆電路圖
  14. 0.06 MB   |  10次下載  |  免費
  15. 8萬用表UT58A原理圖
  16. 0.09 MB   |  9次下載  |  5 積分

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935121次下載  |  10 積分
  3. 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
  4. 1.48MB  |  420062次下載  |  10 積分
  5. 3Altium DXP2002下載入口
  6. 未知  |  233088次下載  |  10 積分
  7. 4電路仿真軟件multisim 10.0免費下載
  8. 340992  |  191367次下載  |  10 積分
  9. 5十天學會AVR單片機與C語言視頻教程 下載
  10. 158M  |  183335次下載  |  10 積分
  11. 6labview8.5下載
  12. 未知  |  81581次下載  |  10 積分
  13. 7Keil工具MDK-Arm免費下載
  14. 0.02 MB  |  73810次下載  |  10 積分
  15. 8LabVIEW 8.6下載
  16. 未知  |  65988次下載  |  10 積分
主站蜘蛛池模板: 99热精品在线视频观看 | 日本阿v片在线播放免费 | 国产成人高清亚洲一区app | 色哟哟网站入口在线观看视频 | 亚洲精品国产拍在线观看 | 欧美性动漫3d在线观看完整版 | 一个人免费播放高清在线观看 | 国产精品麻豆a啊在线观看 国产精品麻豆AV | 国产日韩欧美高清免费视频 | 动漫美女被羞羞动漫怪物 | 娇小亚裔被两个黑人 | 久久99精品AV99果冻 | 老师我好爽再深一点老师好涨 | 国产骚妇BB网 | 夜色私人影院永久入口 | 俄罗斯美女性生活 | FREECHINESE东北女人真爽 free18sex性自拍裸舞 | 中文字幕亚洲综合小综合在线 | 亚洲AV永久无码精品澳门 | 99热在线精品免费全部my | 免费三级网址 | 亚洲AV无码偷拍在线观看 | 啪啪做羞羞事小黄文 | 24小时日本高清免费看 | 九九热视频在线观看 | 国产婷婷色综合AV蜜臀AV | 国产精品久免费的黄网站 | 牛牛在线精品视频(正) | 窝窝色资源站 | 亚洲精品无码不卡 | 最新亚洲人成网站在线影院 | jizz日本女人 | 无码人妻99久久密AV | 怡红院美国分院一区二区 | 美女张开腿露出尿口扒开来摸动漫 | 国精产品999一区二区三区有限 | 青娱乐视觉盛宴国产视频 | 小柔的性放荡羞辱日记动漫 | H揉捏娇喘乳叫床NP调教视频 | 久久久久久久99精品免费观看 | 小小水蜜桃视频高清在线观看免费 |