Connecting dual-digit LED modu

Connecting dual-digit LED modules

Abstract: The MAX6954/MAX6955 LED display drivers allow users to drive both individual LED digits and shared segment pins. This application note details what steps must be taken to map the digits properly.

Maxim's MAX6954 and MAX6955 LED display drivers can be used to drive LED digits whose segment pins are individually available. The MAX6954/MAX6955 can also be used to drive dual-digit 7-segment LED modules which feature shared segment pins. Figure 1 shows the internal example configuration of such a device.

Figure 1. Internal configuration of a dual-digit LED module.

Up to eight dual-digit modules or 16 digits can be driven by just one MAX6954 or MAX6955. The following module digit-to-digit mapping is recommended to connect these modules to the MAX6954/MAX6955.

Module1-Digit1 -> Digit 0               DIG1 -> CC00           
Module1-Digit2 -> Digit 1               DIG2 -> CC01           

Module2-Digit1 -> Digit 2               DIG1 -> CC02          
Module2-Digit2 -> Digit 3               DIG2 -> CC03          

Module3-Digit1 -> Digit 4               DIG1 -> CC04           
Module3-Digit2 -> Digit 5               DIG2 -> CC05          

Module4-Digit1 -> Digit 6               DIG1 -> CC06           
Module4-Digit2 -> Digit 7               DIG2 -> CC07          

Module5-Digit1 -> Digit 0a       	DIG1 -> CC00        
Module5-Digit2 -> Digit 1a              DIG2 -> CC01           

Module6-Digit1 -> Digit 2a       	DIG1 -> CC02           
Module6-Digit2 -> Digit 3a     	 	DIG2 -> CC03           

Module3-Digit1 -> Digit 4a              DIG1 -> CC04           
Module3-Digit2 -> Digit 5a              DIG2 -> CC05          

Module4-Digit1 -> Digit 6a              DIG1 -> CC06           
Module4-Digit2 -> Digit 7a              DIG2 -> CC07

Table 4, Connection Scheme for Sixteen 7-Segment Digits, in the MAX6954/MAX6955 data sheet explains that digit 0, 1, 2, 3, 4, 5, 6, and 7's segment pins are identified by 1a, 1b, 1c, 1d, 1e, 1f, 1g, and 1dp; digit 0a, 1a, 2a, 3a, 4a, 5a, 6a,and 7a's segment pins are identified by 2a, 2b, 2c, 2d, 2e, 2f, 2g, and 2dp.

The scan limit should be set accordingly by writing the proper number to register 0x03. For this example with all eight modules or 16 digits, the scan-limit register should have a content of 0x07. The scan-limit register content can be changed to 0x03 if only four modules or eight digits are driven. When only half of the modules or digits are used, the module digit-to-digit mapping can be changed to the following.

Module1-Digit1 -> Digit 0               DIG1 -> CC00           
Module1-Digit2 -> Digit 1               DIG2 -> CC01           

Module2-Digit1 -> Digit 2               DIG1 -> CC02          
Module2-Digit2 -> Digit 3               DIG2 -> CC03          

Module5-Digit1 -> Digit 0a       	DIG1 -> CC00        
Module5-Digit2 -> Digit 1a              DIG2 -> CC01           

Module6-Digit1 -> Digit 2a       	DIG1 -> CC02           
Module6-Digit2 -> Digit 3a       	DIG2 -> CC03

閱讀全文

led(645463) led(645463)

Dual Beam FIB(雙束聚焦離子束)

Dual Beam FIB(雙束聚焦離子束)機臺能在使用離子束切割樣品的同時，用電子束對樣品斷面(剖面)進行觀察，亦可進行EDX的成份分析。iST宜特檢測具備超高分辨率的離子束及電子束的Dual

2018-09-04 16:33:22

AD9139-DUAL-EBZ

BOARD EVAL FOR DUAL AD9139

2023-03-30 11:50:48

ADC0809數字電壓表顯示問題

P2for(k=0;k<1000;k++){/*lighten each LED and equal the below for loopP1=LED[digit[0]]+0x80;P2_4

2013-04-17 09:23:40

AM4378 linux Matrix圖像界面中的例程：求dual_camera的源碼

因為工程需求，使用parallelable camera接口讀取圖像，目前使用Linux Matrix圖形界面中有自帶的測試程序dual_camera，但是源碼不清楚。嘗試過使用v4l進行讀取

2018-05-15 05:12:56

Error connecting to the target: (Error -1170 @ 0x0)

CCS7.3 /CC3220S-LAUNCHPAD: (Error -1170 @ 0x0) Unable to access the DAP) Error connecting

2018-06-21 15:38:33

FPGA模塊調用的問題

首先向大神們致敬哈！先附上我的三個模塊：1。頂層： module modu (clk50m,rst_n,in,out,clk9600);input clk50m,rst_n,in;output

2013-10-24 23:14:51

GPRS模塊卡在TCP CONNECTING

用花生殼的域名能收也能發，換成ip就不行了，家里和公司的固定ip都連不上，一直卡在connecting...#if 0u8 mode=0;//0,TCPá??ó;1,UDPá??óu8 port

2019-05-28 04:37:10

Gowin I3C Dual Clock IP用戶指南及參考設計

本次發布 Gowin I3C Dual Clock IP 用戶指南及參考設計。Gowin I3C Dual Clock IP 的用戶指南及參考設計可在高云官網下載，其中，參考設計已配置一例特定參數

2022-09-30 06:08:11

Gowin I3C Slave Dual Clock IP用戶使用指南

Gowin?I3C Slave Dual Clock IP 用戶指南主要內容包括功能特點、端口描述、時序說明、寄存器描述、配置調用、參考設計等，旨在幫助用戶快速了解 Gowin I3C Slave Dual Clock IP 的產品特性、特點及使用方法。

2022-09-30 06:56:30

NUC123 SPI如何使用Dual I/O功能？

所使用的板子:NuTiny_NUC123 x 2 功能描述: 當我們使用SPI Flash的時候, 為了加快讀/寫速度, 有支援Dual I/O或是Quad I/O功能的型號是一大優點, 但是

2023-06-21 07:13:14

RT-Thread使用webserver的步驟

#include #include int LED1=0;int BEEP=0;#define NUM_CONFIG_CGI_URIS (sizeof(ppcURLs) / sizeof(tCGI

2023-02-24 14:47:33

VX-501-DUAL

VX-501-DUAL - Base Stations - Vectron International, Inc

2022-11-04 17:22:44

Warning: You are connecting digital power to analog ground.

Warning: You are connecting digital power to analog ground.請問高手們這個問題怎么解決？

2013-09-16 22:32:25

i.MX 7Dual產品數據手冊

i.MX 7Dual數據手冊

2022-12-13 06:41:09

i.MX 7Dual評估套件資料分享

i.MX 7Dual評估套件宣傳手冊

2022-12-13 06:57:05

single ram和dual ram的問題

求高手指點，有什么設計方法可以用一個single port ram來實現single dual port ram的功能，外部接口要一樣，輸出結果要一樣；module new_dual ( clka

2014-02-19 09:51:44

為什么LCD顯示一直停在USB Connecting？

把原程序的.hex文件下載到板子后，發現LCD顯示一直停在 USB Connecting...中，是什么原因呢？程序沒有改過的，SD卡8G的，是不是SD卡不支持呢？

2019-07-26 04:35:08

為什么找不到路徑 dual_sbl 中的“\boards\<board_name>\dual_sbl\lpc55xx_dsbl_app\cm33_core0\tools”？

找不到路徑 dual_sbl 中的“\boards\\dual_sbl\lpc55xx_dsbl_app\cm33_core0\tools”。評估套件：LPC55s69致力于輔助引導加載程序演示

2023-03-21 06:56:47

使用CS+ for CC 燒錄 RH850 F1K R7F701581時報Failed in connecting by LPD.Failed in connecting by LPD.

如題：接線確認過沒有問題，燒錄F1L系列沒有問題，換了一個PIN對PIN的的F1K后報Failed in connecting by LPD。然后使用RFP燒錄該工程的.mot文件也可以燒錄成功。就是使用CS+ 燒錄，報連接失敗。無法在線調試，有無大佬幫忙看下是怎么回事？

2019-08-19 11:23:25

具有電流均衡功能的汽車日間行車燈雙串LED驅動器包括BOM及層圖

描述This reference design is a dual string LED driver that implements an operational amplifier based

2018-10-15 15:02:20

在Debug時，出現 Error connecting to the target:

在Debug時，出現Error connecting to the target:(Error -1135 @ 0x0)The emulator reported an error. Confirm

2018-11-13 14:49:26

在用CCS5.5Debug時遇到Error connecting to the target問題

在debug時，出現C28xx:Error connecting to the target:(Error -1135 @ 0x0)The emulator reported an error.

2019-11-06 11:48:23

基于GW1N-4芯片的DUAL BOOT下載方案

為了滿足用戶對 GW1N-4 FPGA 的 DUAL BOOT 功能需求，在現有芯片下載電路基礎上，通過增加少量外部電路實現其功能，考慮不同用戶電源設計不同，提供了兩種電路形式。通過電路仿真和板級驗證該電路均能滿足DUAL BOOT 下載需求。

2022-09-28 06:52:39

當大范圍結構定點分析觀察 Dual-Beam FIB滿足不了時怎么辦？

一般而言，若是小范圍且局部的Cross section分析，我們會建議您使用Dual-Beam FIB，擁有邊切邊拍，讓您快速取得結構圖。然而，若是遇到PCB、3D 芯片、硅穿孔結構(TSV

2019-08-15 14:11:25

怎么將5digit BCD轉換為BIN

你好，請幫助我一個使用匯編語言的人將5digit BCD轉換為BIN 非常感謝以上來自于谷歌翻譯以下為原文 hello, please can help me someone one

2019-03-26 15:02:12

怎么通過vivado 2014.3進行編碼？

七段顯示器的陰極（顯示為SSeg_CA）時。我把信號放到LED上，看看它在讀什么，我正在讀8'b00000000。我已經驗證了秒，小時，小時狀態正在改變，因為我也想要它們（也通過LED）。有人可以幫忙

2020-03-26 09:50:23

我在 measurent &automation explorer上可以看到設備但是總是顯示connecting to camera

我在 measurent &automation explorer上可以看到設備但是總是顯示connecting to camera，旁邊顯示一個紅色的小×號

2016-01-30 11:56:12

無線技術干貨大薈萃——無線 ConnecTIng

無線 ConnecTIng 點擊查看博文：物聯網簡介工業應用中的藍牙低功耗借助無線?網狀網絡解決方案擴展連接邊界 Wittra公司帶來了采用Sub-1GHz和低功耗藍牙?技術的“移動

2018-06-21 13:40:23

求Error connecting to the target(Error - 1143 @0x0)問題解決辦法

調試6678過程中，給兩個核燒寫程序，燒完出現如下錯誤：Error connecting to the target(Error - 1143 @0x0)C66xx_0: Error

2018-06-21 04:25:20

用于MV/LV配電的自動功率因數控制器包括BOM及層圖

are cascaded to drive four digit SS LED display with decimal point.Relay/ Transistor output switching &ndash(...)

2018-09-13 08:44:52

能控制7位7段LED顯示2 HC595嗎

我能控制7位7段LED顯示2 HC595嗎？？？？如果是，那么它是怎樣的呢？請發送任何代碼的例子！！！！！！！謝謝！！以上來自于百度翻譯以下為原文 CAN I CONTROL 7DIGIT

2019-01-17 07:25:49

請問Psoc6 DFU支持MDIO接口Dual-app升級嗎？

你好，我需要使用PSoc6做MDIO Dual-app升級，但是看了PSoC 6 MCU Device Firmware Update Software Development Kit Guide

2024-02-18 06:11:57

請問STM32 flash dual bank擦除失敗怎么解決？

429 FLASH 為1M, 我想配置為dual bank，每塊512M.設置DB1M成功。現在想擦除dual bank 15 sector, 即#define

2018-09-19 09:24:23

那位大神幫我看看三位半的數字電壓表

***it led=P0^7;unsigned int h;unsigned char digit[4]; unsigned char table[]={0xc0

2015-05-22 23:09:20

MAX15034 pdf datasheet (Config

range of 4.75V to 5.5V or 5V to 28V. A mode select input allows for a dual-output supply or connecting two phases together for a single-output

2008-08-18 12:54:13

ICL7135 pdf datasheet (BCD Out

The Intersil ICL7135 precision A/D converter, with its multiplexedBCD output and digit drivers

2008-12-22 20:57:36

Dual Polarity Antennas

Dual Polar

2009-03-16 09:25:12

AD9627-11,pdf datasheet (Digit

The AD9627-11 is a dual, 11-bit, 105 MSPS/150 MSPS analog-to-digital converter (ADC). The AD9627-11

2009-09-08 08:34:42

LM3503,pdf datasheet (Dual-Dis

The LM3503 is a white LED driver for lighting applications.For dual display backlighting

2009-09-30 09:07:45

LM27965,pdf datasheet (Dual Di

The LM27965 is a highly integrated charge-pump-based dual-display LED driver. The device can drive

2009-09-30 09:13:51

ADP1655,datasheet,pdf(Dual LED

The ADP1655 is a very compact, highly efficient, dual white LED flash driver for high resolution

2009-10-22 10:25:13

ICL7129,pdf,datasheet,Digit LC

The Intersil ICL7129 is a very high performance 41/2-digit,analog-to-digital converter

2010-03-24 10:49:15

CAT4134-500 mA Dual Channel Mo

CAT4134 pdf,datasheet 500 mA Dual Channel Movie/Flash LED Driver The CAT4134 is a high power

2010-04-12 14:57:17

TLC7135,pdf (4 1/2-Digit Preci

technology. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a m

2010-06-03 17:26:15

5.5-Digit Multimeter, B-Size A

The AgilentE1326B autoranging 5.5-Digit Multimeter is aB-size, 2-slot, register-based VXI module.

2010-07-09 17:34:28

AS1105,pdf (4-Digit LED Driver

The AS1105 is a LED driver for 7 segment numeric displays of up to 4 digits. The AS1105 can

2010-09-06 09:24:44

AS1100,pdf (8-Digit LED driver

The AS1100 is an LED driver for 7 segment numeric displays of up to 8 digits. The AS1100 can

2010-09-06 09:31:15

FAN6791/FAN6793,pdf (Highly In

The highly integrated FAN6791/3 dual PWMcombination controller provides several features toenhance

2010-10-26 15:10:42

Tech Brief 2: Dual-Polarity Am

in traditional operational amplifier (op amp) circuits. Examples are given for typical op amp configurations (inverting, non-inverting) where the digit

2009-04-20 16:41:54