資料介紹
The ADM1060 is a programmable supervisory/sequencing device that offers a single chip solution for multiple power supply fault detection and sequencing in communications systems.
In central offices, servers, and other infrastructure systems, a common backplane dc supply is reduced to multiple board sup-plies using dc-to-dc converters. These multiple supplies are used to power different sections of the board, such as 3.3 V logic circuits, 5 V logic circuits, DSP core, and DSP I/O circuits. There is usually a requirement that certain sections power up before others; for example, a DSP core may need to power up before the DSP I/O, or vice versa, to avoid damage, miscommunication, or latch-up. The ADM1060 facilitates this, providing supply
fault detection and sequencing/combinatorial logic for up to seven independent supplies. The seven supply fault detectors consist of one high voltage detector (up to +14.4 V), two bipolar voltage detectors (up to +6 V or down to ?6 V), and four posi-tive low voltage detectors (up to +6 V)。 All of the detectors can be programmed to detect undervoltage, overvoltage, or out-of-window (undervoltage or overvoltage) conditions. The inputs to these supply fault detectors are via the VH (high voltage) pin, VBn (positive or negative) pins, and VPn (positive only) pins. Either the VH supply or one of the VPn supplies is used to power the ADM1060 (whichever is highest)。 This ensures that in the event of a supply failure, the ADM1060 is kept alive for as long as possible, thus enabling a reliable fault flag to be asserted and the system to be powered down in an ordered fashion.
Other inputs to the ADM1060 include a watchdog detector (WDI) and four general-purpose inputs (GPIn)。 The watchdog detector can be used to monitor a processor clock. If the clock does not toggle (transition from low to high or from high to low) within a programmable timeout period (up to 18 sec.), a fail flag will assert. The four general-purpose inputs can be con-figured as logic buffers or to detect positive/negative edges and to generate a logic pulse or level from those edges. Thus, the user can input control signals from other parts of the system (e.g., RESET or POWER_GOOD) to gate the sequencing of the supplies supervised by the ADM1060.
The ADM1060 features nine programmable driver outputs (PDOs)。 All nine outputs can be configured to be logic outputs, which can provide multiple functions for the end user such as RESET generation, POWER_GOOD status, enabling of LDOs, and watchdog timeout assertion. PDOs 1 to 4 have the added feature of being able to provide an internally charge-pumped high voltage for use as the gate drive of an external N-channel FET that could be placed in the path of one of the supplies being supervised.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
- TLC551,TLC551Y单芯片时序电路数据表0次下载
- ADM8698:过时的微处理器监控电路数据表1次下载
- ADM8690/ADM8691/ADM8695:微处理器监控电路数据表14次下载
- ADM1060:通信系统监控/排序电路数据表3次下载
- ADM1232A:微处理器监控电路数据表4次下载
- ADM690-ADM695:微处理器监控电路数据表7次下载
- ADM698/ADM699:微处理器监控电路数据表7次下载
- ADM6339:四路电压微处理器监控电路数据表7次下载
- ADM705/ADM706/ADM707/ADM708:低成本微处理器监控电路数据表3次下载
- ADM696/ADM697:微处理器监控电路数据表7次下载
- ADM8699:微处理器监控电路数据表8次下载
- ADM9690:电源和看门狗定时器监控电路数据表1次下载
- ADM8690-ADM8695:微处理器监控电路数据表5次下载
- ADM8696/ADM8697:微处理器监控电路数据表7次下载
- AN-755: ADM1060 EEPROM校验和信息6次下载
- 硬件电路设计之时序电路设计3728次阅读
- 组合逻辑电路和时序逻辑电路的区别和联系7155次阅读
- 基本逻辑电路、时序电路、组合电路设计1489次阅读
- 时序电路到底是什么5737次阅读
- 时序电路基本组件及时序逻辑电路应用实例7180次阅读
- 同步时序逻辑电路的设计分析2904次阅读
- 具有突破性、可扩展、直观易用的上电时序系统可加快设计和调试速度1984次阅读
- 时序逻辑电路设计8619次阅读
- ADM1266电源完整监控和排序解决方案2588次阅读
- FPGA之时序电路的理解3478次阅读
- FPGA的设计主要是以时序电路为主吗?4882次阅读
- 同步时序设计时应注意的几大要点4566次阅读
- FPGA中组合逻辑和时序逻辑的区别8943次阅读
- 数字电路之时序电路19171次阅读
- 多电源系统的监控和时序控制1935次阅读
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論