資料介紹
The AD5171 is a 64-position, one-time programmable (OTP) digital potentiometer2 that uses fuse link technology to achieve the memory retention of the resistance setting function. OTP is a cost-effective alternative over the EEMEM approach for users who do not need to reprogram new memory settings in the digital potentiometer. This device performs the same electronic adjustment function as most mechanical trimmers and variable resistors. The AD5171 is programmed using a 2-wire, I2 C?- compatible digital control. It allows unlimited adjustments before permanently setting the resistance value. During the OTP activation, a permanent fuse blown command is sent after the final value is determined, freezing the wiper position at a given setting (analogous to placing epoxy on a mechanical trimmer).When this permanent setting is achieved, the value does not change regardless of supply variations or environmental stresses under normal operating conditions. To verify the success of permanent programming, Analog Devices, Inc., patterned the OTP validation such that the fuse status can be discerned from two validation bits in read mode. For applications that program the AD5171 in factories, Analog Devices offers device programming software that operates across Windows? 95 to XP platforms, including Windows NT. This software application effectively replaces the need for external I 2 C controllers or host processors and, therefore, significantly reduces the development time of the users. An AD5171 evaluation kit includes the software, connector, and cable that can be converted for factory programming applications. The AD5171 is available in a compact 8-lead SOT-23 package. All parts are guaranteed to operate over the automotive temperature range of ?40°C to +125°C. Besides its unique OTP feature, the AD5171 lends itself well to other general-purpose digital potentiometer applications due to its temperature performance, small form factor, and low cost.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
- AD5207 2通道256位数字电位器数据表4次下载
- AD5116单通道,64位,按钮,±8%电阻容差,非易失性数字电位器数据表5次下载
- AD5258非易失性、兼容I2C®的64位数字电位器数据表10次下载
- AD5227:64位升降控制数字电位器数据表9次下载
- AD5200/AD5201:256位和33位数字电位器数据表1次下载
- AD5231:非易失性存储器,1024位数字电位器数据表5次下载
- AD7376:+30 V/±15 V操作128位数字电位器数据表2次下载
- AD5171数字电位器评估板UG-3943次下载
- AD5273:64位OTP数字电位器数据表0次下载
- AD5232:非易失性存储器,双256位数字电位器数据表1次下载
- AD5171:64位OTP数字电位器数据表7次下载
- AD5162:双256位SPI数字电位器数据表9次下载
- AD5233:非易失性存储器,四位64位电位器数据表6次下载
- AD5235:非易失性存储器,双1024位数字电位器数据表18次下载
- AD5171,pdf datasheet (64-Posit8次下载
- 用线性数字电位器实现对数调节1696次阅读
- 线性数字电位器可创建任意电压曲线1385次阅读
- 数字电位器取代机械电位器2684次阅读
- AD8400系列数字电位器的驱动设计与实现3967次阅读
- AD527x系列数字电位器的驱动设计与实现2416次阅读
- 数字电位器代替机械电位器的作用3280次阅读
- 如何理解数字电位器9680次阅读
- 如何制作数字电位器_数字电位器制作方法21579次阅读
- 常用数字电位器芯片有哪些114226次阅读
- 数字电位器工作原理详解_数字电位器应用_数字电位器选型指南60155次阅读
- 数字电位器控制原理图35470次阅读
- 数字电位器应用实例_数字电位器四大应用电路47078次阅读
- 数字电位器怎么选型_数字电位器选型指南9801次阅读
- 数字电位器串口设计与仿真1883次阅读
- DS1868B 双通道数字电位器3369次阅读
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論