如何利用數字電源管理進行能量采集

　　數字電源管理是任何能源采集系統的重要組成部分。數字控制是允許一個單一的設備來處理范圍廣泛的能源有非常不同的要求，從光伏電池的最大功率點跟蹤（MPPT）的壓電和高阻抗的熱源

　　該bq25505裝置設計提取能量收集各種來源產生的微電。數字管理確保一個二次充電電池不收取多由這個提取的電源，電壓升壓，也不會耗盡超出安全限制的系統負載。

　　一個集成的多路復用器柵極驅動器自主切換系統負載到一個主要的非可充電電池，如果二次電池電壓低于用戶定義的閾值，允許設計人員為不同的應用程序優化系統。

　　Figure 1： The bq25505 from Texas Instruments showing the pins for the digital power management.

　　The design starts with a DC-DC boost charger that requires only microwatts of power to begin operating. The main boost charger is powered from the boost output， VSTOR， as shown in Figure 1. Once the VSTOR voltage is above the VSTOR_CHGEN generator value， typically 1.8 V， the boost charger can effectively extract power from low voltage output harvesters such as TEGs or single- or dual-cell solar panels that produce voltages down to 100 mV. When the boost output is less than 100 mV， the cold start circuit needs to have at least 330 mV to charge VSTOR up to 1.8 V.