INTEL NUC NUC5I5RYB-IS

This signal has a weak internal pull-down. 0 = Enable security measures defined in the Flash Descriptor. 1 = Disable Flash Descriptor Security （override）。 This strap should only be asserted high using external pull-up in manufacturing/debug environments ONLY

This signal does not have an internal resistor; an external resistor is required， 0 = DCPSUS1， DCPSUS2， DCPSUS3 and DCPSUS4 are powered from an external power source （should be connected to an external VRM）。 1 = Integrated VRMs enabled. DCPSUS1， DCPSUS2 and DCPSUS3 can be left as No Connect.

This signal does not have an internal resistor; an external resistor is required. 0 = Disable Integrated DeepSx Well （DSW） On-Die Voltage Regulator. This mode is only supported for testing environments. 1 = Enable DSW 3.3V-to-1.05V Integrated DeepSx Well （DSW） On-Die Voltage Regulator. This must always be pulled high on production boards

This signal has a weak internal pull-down. 0 = Disable Intel ME Crypto Transport Layer Security （TLS） cipher suite （no confidentiality）。 1 = Enable Intel ME Crypto Transport Layer Security （TLS） cipher suite （with confidentiality）。 Must be pulled up to support Intel AMT with TLS.