Words and logos marked with ? or ? are registered trademarks or trademarks of ARM Limited in the EU and other

　　countries， except as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may

　　be the trademarks of their respective owners.

　　Neither the whole nor any part of the information contained in， or the product described in， this document may be

　　adapted or reproduced in any material form except with the prior written permission of the copyright holder.

　　The product described in this document is subject to continuous developments and improvements. All particulars of the

　　product and its use contained in this document are given by ARM in good faith. However， all warranties implied or

　　expressed， including but not limited to implied warranties of merchantability， or fitness for purpose， are excluded.

　　This document is intended only to assist the reader in the use of the product. ARM shall not be liable for any loss or

　　damage arising from the use of any information in this document， or any error or omission in such information， or any

　　incorrect use of the product.

　　Some material in this document is based on ANSI/IEEE Std 754-1985， IEEE Standard for Binary Floating-Point

　　Arithmetic. The IEEE disclaims any responsibility or liability resulting from the placement and use in the described

　　manner.

　　Where the term ARM is used it means “ARM or any of its subsidiaries as appropriate”.