資料介紹
Introduction This section details the purpose and scope of the reliability prediction procedure and indicates changes from the previous issue (SR-332, Issue 1, May 2001)。 1.1 Purpose and Scope A prediction of reliability is an important element in the process of selecting equipment for use by telecommunications service providers and other buyers of electronic equipment. As used here, reliability is a measure of the frequency of equipment failures as a function of time. Reliability has a major impact on maintenance and repair costs and on the continuity of service. The purpose of this Reliability Prediction Procedure (RPP) is to document recommended methods for predicting device and unit hardware reliability. This procedure also documents a recommended method for predicting serial system hardware reliability. It contains instructions for suppliers to follow when providing predictions of their device, unit, or serial system reliability (hereinafter called “product” reliability)。 It also can be used directly by telecommunications service providers for product reliability evaluation. Device and unit failure rate predictions generated using this procedure are applicable for commercial electronic products whose physical design, manufacture, installation, and reliability assurance practices meet the appropriate Telcordia (or equivalent) generic and product-specific requirements. This procedure cannot be used directly to predict the reliability of a non-serial system. However, the unit reliability predictions resulting from application of this procedure can be input into system reliability models for prediction of system-level hardware reliability parameters. Troubles caused by transient faults, software problems, procedural errors, or unexpected operating environments can have a significant impact on system-level reliability. Therefore, system hardware failures represent only a portion of the total system trouble rate. Currently, this procedure also includes some discussion of system-level operating and configuration information that may affect overall system reliability. The procedure directs the requesting organization to compile this information in cases where the unit-level reliability predictions are computed for input to a specific system reliability model. This system-level information is not directly necessary for computation of the unit-level reliability predictions, but these information requirements are not currently addressed in any other Telcordia requirements document and, therefore, are included in this Special Report (SR).
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
- 高温电子设备对设计和可靠性带来的挑战0次下载
- 行业专题报告_半导体检测设备行业专题报告.zip4次下载
- 电子行业专题报告:汽车半导体研究框架.zip2次下载
- 半导体检测设备行业专题报告.zip5次下载
- 2021年智能控制器专题报告.zip1次下载
- 2021年功率半导体专题报告.zip1次下载
- 雷卯电子在中国新能源车充电与驱动技术大会做专题报告4次下载
- 电子设备可靠性预测程序7次下载
- 高温电子设备对设计和可靠性带来挑战资料下载47次下载
- 电子设备非工作状态可靠性预计手册国家标准免费下载52次下载
- 网络可靠性预测模型8次下载
- 汽车电子设备可靠性检查的加强应用10次下载
- 高温电子设备对设计和可靠性带来挑战.pdf0次下载
- 加强汽车电子设备可靠性检查0次下载
- 高温电子设备对设计和可靠性带来挑战0次下载
- 半导体集成电路的可靠性评价242次阅读
- 如何确保IGBT的产品可靠性1855次阅读
- 电子产品研制阶段可靠性增长试验研究1228次阅读
- 电子元器件使用可靠性怎么判断2107次阅读
- 军工电子设备EMC试验标准和实用技术分享4049次阅读
- 如何提高电子元器件可靠性?1012次阅读
- 可靠性预测的不确定性是否证明强制要求双通道安全是合理的?1059次阅读
- 高温电子设备对设计和可靠性构成挑战2098次阅读
- 医疗设备研制中的可靠性设计方法与分析4610次阅读
- 影响高温电子设备的认证方法和设计技术3335次阅读
- 如何实现电源的可靠性设计3680次阅读
- 可靠性的历史!可靠性的相关定义和概念9111次阅读
- 可靠性的历史及相关定义和概念5483次阅读
- 深度剖析可靠性技术与试验3086次阅读
- 高温的环境下 电子设备都是怎么工作的6744次阅读
下載排行
本周
- 1DC電源插座圖紙
- 0.67 MB | 2次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 4AN111-LTC3219用戶指南
- 84.32KB | 次下載 | 免費
- 5AN153-用于電源系統管理的Linduino
- 1.38MB | 次下載 | 免費
- 6AN-283: Σ-Δ型ADC和DAC[中文版]
- 677.86KB | 次下載 | 免費
- 7SM2018E 支持可控硅調光線性恒流控制芯片
- 402.24 KB | 次下載 | 免費
- 8AN-1308: 電流檢測放大器共模階躍響應
- 545.42KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 450次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 138次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 130次下載 | 免費
- 4使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 53314A函數發生器維修手冊
- 16.30 MB | 31次下載 | 免費
- 6美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 7如何正確測試電源的紋波
- 0.36 MB | 17次下載 | 免費
- 8感應筆電路圖
- 0.06 MB | 10次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論