資料介紹
Splitting Planes For Speed and Power:Designers are sometimes confused about the question of how to deal with multiple power planes on printed circuit
boards, and how to deal with their separation. We often talk
about the horizontal separation between planes as a “split” and
there are some design rules that may apply when designing in
the area of splits.
But before we talk about how to deal with splits between
planes, it is instructive to talk about why we have separate
power planes in the first place – to accommodate separate
power supplies. And one reason we might have separate
power supplies is because we might have different voltages in
our circuits. So the issue of separate voltages might be a reasonable
place to start.
boards, and how to deal with their separation. We often talk
about the horizontal separation between planes as a “split” and
there are some design rules that may apply when designing in
the area of splits.
But before we talk about how to deal with splits between
planes, it is instructive to talk about why we have separate
power planes in the first place – to accommodate separate
power supplies. And one reason we might have separate
power supplies is because we might have different voltages in
our circuits. So the issue of separate voltages might be a reasonable
place to start.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 基于AN_High_Speed_CANCAN收發器的參考設計
- Designing High Speed Active Filt 0次下載
- High-Speed_Digital_System_Design 20次下載
- TMP816,pdf(Variable Speed Sing
- TMP814,pdf(Variable Speed Sing
- High Speed Measurements on Mod
- High-Speed Board Design Techni
- VIPA-惠朋Speed7 高速 CPU
- 高頻情況下的電容使用參照(The Bypass Capaci
- Motor Speed Measurement Consid
- High-Speed Audio Ripping,Encod
- Interfacing to High Speed ADCs
- High-Speed Differential Signal
- High-speed Digital Design - Jo 0次下載
- High Speed/Low Loss, CAF Resis 0次下載
- DPHY在high-speed模式下有雙向傳輸?shù)墓δ軉幔?/a> 420次閱讀
- STM32中這些常見又實用的英文縮寫和詞匯 4653次閱讀
- 寬禁帶器件和仿真環境介紹 1457次閱讀
- FPGA選型時的速度等級參數介紹 1.6w次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1306次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1600次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 984次閱讀
- 鋰電池并聯充電時保護板均衡原理 3w次閱讀
- 一款以BitTorrent代幣連接和獎勵用戶的軟件BitTorrent Speed介紹 3328次閱讀
- 單片機對直流電機的調速測試程序設計 1945次閱讀
- 更小更智能的電機控制器推進HEV/EV市場 1105次閱讀
- PCB中plane和layer有什么區別 1.3w次閱讀
- pcb正片和負片的區別?布局、布線技巧?pcb設計工藝規范 8774次閱讀
- 捉摸不透的USB接口名稱,三句話理清USB標準亂象 1274次閱讀
- 泰爾實驗室:HSPA關鍵技術解析 1464次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1497次下載 | 免費
- 2TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 3單片機典型實例介紹
- 18.19 MB | 103次下載 | 1 積分
- 4S7-200PLC編程實例詳細資料
- 1.17 MB | 28次下載 | 1 積分
- 5筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 6開關電源原理及各功能電路詳解
- 0.38 MB | 15次下載 | 免費
- 79天練會電子電路識圖
- 5.91 MB | 6次下載 | 免費
- 8100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234314次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 6接口電路圖大全
- 未知 | 30321次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21540次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537794次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234314次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183278次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多