色哟哟视频在线观看-色哟哟视频在线-色哟哟欧美15最新在线-色哟哟免费在线观看-国产l精品国产亚洲区在线观看-国产l精品国产亚洲区久久

AB32VG1主頻 120M ，片上集成 RAM 192K, Flash 4Mbit，ADC，PWM，USB，UART，IIC 等資源。提供SDK，驅動齊全，支持RT-Thread Studio 開發應用，圖形化配置系統，一鍵開啟外設，一鍵使用軟件包，強大的自動代碼編輯輔助。

DHT22數字溫濕度傳感器是一款含有已校準數字信號輸出的溫濕度復合傳感器，它應用專用的數字模塊采集技術和溫濕度傳感技術，確保產品具有極高的可靠性和卓越的長期穩定性。DHT11是一款溫濕度傳感器。 其測量精度為：濕度+-5%RH， 溫度+-2℃，量程為：濕度20-90%RH， 溫度0~50℃，采樣周期大于等于1秒/次。傳感器包括一個電阻式感濕元件和一個NTC測溫元件，并連接一個高性能8位單片機相。DHT11的優點有：品質高、響應快、抗干擾能力強、性?xún)r(jià)比極高、體積小、功耗低等。

#include <board.h>

#include "dhtxx.h"

#define DBG_TAG                  "sensor.asair.dhtxx"

#ifdef PKG_USING_DHTXX_DEBUG

#define DBG_LVL                  DBG_LOG

#else

#define DBG_LVL                  DBG_ERROR

#endif

#include <rtdbg.h>

/* timing */

#define DHT1x_BEGIN_TIME         20  /* ms */

#define DHT2x_BEGIN_TIME         1   /* ms */

#define DHTxx_PULL_TIME          30  /* us */

#define DHTxx_REPLY_TIME         100 /* us */

#define MEASURE_TIME             40  /* us */

/**

 * This function will split a number into two part according to times.

 *

 * @param num      the number will be split

 * @param integer  the integer part

 * @param decimal  the decimal part

 * @param times    how many times of the real number (you should use 10 in this case)

 *

 * @return 0 if num is positive, 1 if num is negative

 */

int split_int(const int num, int *integer, int *decimal, const rt_uint32_t times)

{

    int flag = 0;

    if (num < 0) flag = 1;

    int anum = num<0 ? -num : num;

    *integer = anum / times;

    *decimal = anum % times;

    return flag;

}

/**

 * This function will convert temperature in degree Celsius to Kelvin.

 *

 * @param c  the temperature indicated by degree Celsius

 *

 * @return the result

 */

float convert_c2k(float c)

{

    return c + 273.15;

}

/**

 * This function will convert temperature in degree Celsius to Fahrenheit.

 *

 * @param c  the temperature indicated by degree Celsius

 *

 * @return the result

 */

float convert_c2f(float c)

{

    return c * 1.8 + 32;

}

/**

 * This function will convert temperature in degree Fahrenheit to Celsius.

 *

 * @param f  the temperature indicated by degree Fahrenheit

 *

 * @return the result

 */

float convert_f2c(float f)

{

    return (f - 32) * 0.55555;

}

/**

 * This function will read a bit from sensor.

 *

 * @param pin  the pin of Dout

 *

 * @return the bit value

 */

static uint8_t dht_read_bit(const rt_base_t pin)

{

    uint8_t retry = 0;

    while(rt_pin_read(pin) && retry < DHTxx_REPLY_TIME)

    {

        retry++;

        rt_hw_us_delay(1);

    }

    retry = 0;

    while(!rt_pin_read(pin) && retry < DHTxx_REPLY_TIME)

    {

        retry++;

        rt_hw_us_delay(1);

    }

    rt_hw_us_delay(MEASURE_TIME);

    return rt_pin_read(pin);

}

/**

 * This function will read a byte from sensor.

 *

 * @param pin  the pin of Dout

 *

 * @return the byte

 */

static uint8_t dht_read_byte(const rt_base_t pin)

{

    uint8_t i, byte = 0;

    for(i=0; i<8; i++)

    {

        byte <<= 1;

        byte |= dht_read_bit(pin);

    }

    return byte;

}

/**

 * This function will read and update data array.

 *

 * @param dev  the device to be operated

 *

 * @return RT_TRUE if read successfully, otherwise return RT_FALSE.

 */

rt_bool_t dht_read(dht_device_t dev)

{

    RT_ASSERT(dev);

    uint8_t i, retry = 0, sum = 0;

#ifdef PKG_USING_DHTXX_INTERRUPT_DISABLE

    rt_base_t level;

#endif

    /* Reset data buffer */

    rt_memset(dev->data, 0, DHT_DATA_SIZE);

    /* MCU request sampling */

    rt_pin_mode(dev->pin, PIN_MODE_OUTPUT);

    rt_pin_write(dev->pin, PIN_LOW);

    if (dev->type == DHT11 || dev->type == DHT12) {

        rt_thread_mdelay(DHT1x_BEGIN_TIME);        /* Tbe */

    } else {

        rt_thread_mdelay(DHT2x_BEGIN_TIME);

    }

#ifdef PKG_USING_DHTXX_INTERRUPT_DISABLE

    level = rt_hw_interrupt_disable();

#endif

    rt_pin_mode(dev->pin, PIN_MODE_INPUT_PULLUP);

    rt_hw_us_delay(DHTxx_PULL_TIME);               /* Tgo */

    /* Waiting for sensor reply */

    while (rt_pin_read(dev->pin) && retry < DHTxx_REPLY_TIME)

    {

        retry++;

        rt_hw_us_delay(1);                         /* Trel */

    }

    if(retry >= DHTxx_REPLY_TIME) return RT_FALSE;

    retry = 0;

    while (!rt_pin_read(dev->pin) && retry < DHTxx_REPLY_TIME)

    {

        retry++;

        rt_hw_us_delay(1);                         /* Treh */

    };

    if(retry >= DHTxx_REPLY_TIME) return RT_FALSE;

    /* Read data */

    for(i=0; i<DHT_DATA_SIZE; i++)

    {

        dev->data[i] = dht_read_byte(dev->pin);

    }

#ifdef PKG_USING_DHTXX_INTERRUPT_DISABLE

    rt_hw_interrupt_enable(level);

#endif

    /* Checksum */

    for(i=0; i<DHT_DATA_SIZE-1; i++)

    {

        sum += dev->data[i];

    }

    if(sum != dev->data[4]) return RT_FALSE;

    return RT_TRUE;

}

/**

 * This function will get the humidity from dhtxx sensor.

 *

 * @param dev  the device to be operated

 *

 * @return the humidity value

 */

rt_int32_t dht_get_humidity(dht_device_t const dev)

{

    RT_ASSERT(dev);

    rt_int32_t humi = 0;

    switch(dev->type)

    {

    case DHT11:

    case DHT12:

        humi = dev->data[0] * 10 + dev->data[1];

        break;

    case DHT21:

    case DHT22:

        humi = (dev->data[0] << 8) + dev->data[1];

        break;

    default:

        break;

    }

    return humi;

}

/**

 * This function will get the temperature from dhtxx sensor.

 *

 * @param dev  the device to be operated

 *

 * @return the temperature value

 */

rt_int32_t dht_get_temperature(dht_device_t const dev)

{

    RT_ASSERT(dev);

    rt_int32_t temp = 0;

    switch(dev->type)

    {

    case DHT11:

    case DHT12:

        temp = dev->data[2] * 10 + (dev->data[3] & 0x7f);

        if(dev->data[3] & 0x80) {

            temp = -temp;

        }

        break;

    case DHT21:

    case DHT22:

        temp = ((dev->data[2] & 0x7f) << 8) + dev->data[3];

        if(dev->data[2] & 0x80) {

            temp = -temp;

        }

        break;

    default:

        break;

    }

    return temp;

}

/**

 * This function will init dhtxx sensor device.

 *

 * @param dev  the device to init

 * @param pin  the pin of Dout

 *

 * @return the device handler

 */

rt_err_t dht_init(struct dht_device *dev, const rt_base_t pin)

{

    if(dev == NULL)

        return -RT_ERROR;

    dev->type = DHT_TYPE;

    dev->pin  = pin;

    rt_memset(dev->data, 0, DHT_DATA_SIZE);

    rt_pin_mode(dev->pin, PIN_MODE_INPUT_PULLUP);

    return RT_EOK;

}

dht_device_t dht_create(const rt_base_t pin)

{

    dht_device_t dev;

    dev = rt_calloc(1, sizeof(struct dht_device));

    if (dev == RT_NULL)

    {

        LOG_E("Can't allocate memory for dhtxx device");

        return RT_NULL;

    }

    dev->type = DHT_TYPE;

    dev->pin  = pin;

    rt_memset(dev->data, 0, DHT_DATA_SIZE);

    rt_pin_mode(dev->pin, PIN_MODE_INPUT_PULLUP);

    return dev;

}

void dht_delete(dht_device_t dev)

{

    if (dev)

        rt_free(dev);

}

#include <rtthread.h>

#include <rtdevice.h>

#include <board.h>

#include "dhtxx.h"

#define DATA_PIN                 PKG_USING_DHTXX_SAMPLE_PIN

/* cat_dhtxx sensor data by dynamic */

static void cat_dhtxx(void)

{

    dht_device_t sensor = dht_create(DATA_PIN);

    if(dht_read(sensor)) {

        rt_int32_t temp = dht_get_temperature(sensor);

        rt_int32_t humi = dht_get_humidity(sensor);

        rt_kprintf("Temp: %d, Humi: %d\n", temp, humi);

    }

    else {

        rt_kprintf("Read dht sensor failed.\n");

    }

    dht_delete(sensor);

}

#ifdef FINSH_USING_MSH

MSH_CMD_EXPORT(cat_dhtxx, read dhtxx humidity and temperature);

#endif

#ifndef __DHTXX_H__

#define __DHTXX_H__

#include <rtthread.h>

#include <rtdevice.h>

#include <sensor.h>

#define DHTLIB_VERSION                       "0.9.0"

#define DHT_DATA_SIZE                        5

/* sensor model type */

#define DHT11                                0

#define DHT12                                1

#define DHT21                                2

#define DHT22                                3

#define AM2301                               DHT21

#define AM2302                               DHT22

#define AM2320                               DHT22

#if defined(PKG_USING_DHTXX_TYPE_DHT11)

#define DHT_TYPE                             DHT11

#elif defined(PKG_USING_DHTXX_TYPE_DHT12)

#define DHT_TYPE                             DHT12

#elif defined(PKG_USING_DHTXX_TYPE_DHT21)

#define DHT_TYPE                             DHT21

#elif defined(PKG_USING_DHTXX_TYPE_DHT22)

#define DHT_TYPE                             DHT22

#endif

struct dht_device

{

    rt_base_t   pin;

    rt_uint8_t  type;

    rt_uint8_t  data[DHT_DATA_SIZE];

    rt_mutex_t  lock;

};

typedef struct dht_device *dht_device_t;

dht_device_t dht_create(const rt_base_t pin);

void dht_delete(dht_device_t dev);

rt_err_t   dht_init(struct dht_device *dev, const rt_base_t pin);

rt_bool_t  dht_read(dht_device_t dev);

rt_int32_t dht_get_humidity(dht_device_t dev);

rt_int32_t dht_get_temperature(dht_device_t dev);

float convert_c2k(float c);

float convert_c2f(float c);

float convert_f2c(float f);

rt_int32_t split_int(const rt_int32_t num, rt_int32_t *integer, 

                     rt_int32_t *decimal, const rt_uint32_t times);

rt_err_t rt_hw_dht_init(const char *name, struct rt_sensor_config *cfg);

#endif /* __DHTXX_H__ */

#include "oled.h"

#include "oledfont.h"

u8 OLED_GRAM[144][8];

struct OLED_sss

{

  uint8_t OLED_SCLK;

  uint8_t OLED_SDIN;

  uint8_t OLED_RST;

  uint8_t OLED_DC;

  uint8_t OLED_CS;

};

struct OLED_sss oled_ccc;

//反顯函數

void OLED_ColorTurn(u8 i)

{

  if(i==0)

    {

      OLED_WR_Byte(0xA6,OLED_CMD);//正常顯示

    }

  if(i==1)

    {

      OLED_WR_Byte(0xA7,OLED_CMD);//反色顯示

    }

}

//屏幕旋轉180度

void OLED_DisplayTurn(u8 i)

{

  if(i==0)

    {

      OLED_WR_Byte(0xC8,OLED_CMD);//正常顯示

      OLED_WR_Byte(0xA1,OLED_CMD);

    }

  if(i==1)

    {

      OLED_WR_Byte(0xC0,OLED_CMD);//反轉顯示

      OLED_WR_Byte(0xA0,OLED_CMD);

    }

}

void OLED_WR_Byte(u8 dat,u8 cmd)

{

  u8 i;

  if(cmd)

    OLED_DC_Set();

  else

    OLED_DC_Clr();

  OLED_CS_Clr();

  for(i=0;i<8;i++)

  {

    OLED_SCLK_Clr();

    if(dat&0x80)

       OLED_SDIN_Set();

    else

       OLED_SDIN_Clr();

    OLED_SCLK_Set();

    dat<<=1;

  }

  OLED_CS_Set();

  OLED_DC_Set();

}

//開啟OLED顯示

void OLED_DisPlay_On(void)

{

  OLED_WR_Byte(0x8D,OLED_CMD);//電荷泵使能

  OLED_WR_Byte(0x14,OLED_CMD);//開啟電荷泵

  OLED_WR_Byte(0xAF,OLED_CMD);//點亮屏幕

}

//關閉OLED顯示

void OLED_DisPlay_Off(void)

{

  OLED_WR_Byte(0x8D,OLED_CMD);//電荷泵使能

  OLED_WR_Byte(0x10,OLED_CMD);//關閉電荷泵

  OLED_WR_Byte(0xAF,OLED_CMD);//關閉屏幕

}

//更新顯存到OLED

void OLED_Refresh(void)

{

  u8 i,n;

  for(i=0;i<8;i++)

  {

     OLED_WR_Byte(0xb0+i,OLED_CMD); //設置行起始地址

     OLED_WR_Byte(0x00,OLED_CMD);   //設置低列起始地址

     OLED_WR_Byte(0x10,OLED_CMD);   //設置高列起始地址

     for(n=0;n<128;n++)

     OLED_WR_Byte(OLED_GRAM[n][i],OLED_DATA);

  }

}

//清屏函數

void OLED_Clear(void)

{

  u8 i,n;

  for(i=0;i<8;i++)

  {

     for(n=0;n<128;n++)

      {

       OLED_GRAM[n][i]=0;//清除所有數據

      }

  }

  OLED_Refresh();//更新顯示

}

//畫點

//x:0~127

//y:0~63

void OLED_DrawPoint(u8 x,u8 y)

{

  u8 i,m,n;

  i=y/8;

  m=y%8;

  n=1<<m;

  OLED_GRAM[x][i]|=n;

}

//清除一個點

//x:0~127

//y:0~63

void OLED_ClearPoint(u8 x,u8 y)

{

  u8 i,m,n;

  i=y/8;

  m=y%8;

  n=1<<m;

  OLED_GRAM[x][i]=~OLED_GRAM[x][i];

  OLED_GRAM[x][i]|=n;

  OLED_GRAM[x][i]=~OLED_GRAM[x][i];

}

//畫線

//x:0~128

//y:0~64

void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2)

{

  u8 i,k,k1,k2,y0;

  if((x1<0)||(x2>128)||(y1<0)||(y2>64)||(x1>x2)||(y1>y2))return;

  if(x1==x2)    //畫豎線

  {

      for(i=0;i<(y2-y1);i++)

      {

        OLED_DrawPoint(x1,y1+i);

      }

  }

  else if(y1==y2)   //畫橫線

  {

      for(i=0;i<(x2-x1);i++)

      {

        OLED_DrawPoint(x1+i,y1);

      }

  }

  else      //畫斜線

  {

    k1=y2-y1;

    k2=x2-x1;

    k=k1*10/k2;

    for(i=0;i<(x2-x1);i++)

      {

        OLED_DrawPoint(x1+i,y1+i*k/10);

      }

  }

}

//x,y:圓心坐標

//r:圓的半徑

void OLED_DrawCircle(u8 x,u8 y,u8 r)

{

  int a, b,num;

    a = 0;

    b = r;

    while(2 * b * b >= r * r)

    {

        OLED_DrawPoint(x + a, y - b);

        OLED_DrawPoint(x - a, y - b);

        OLED_DrawPoint(x - a, y + b);

        OLED_DrawPoint(x + a, y + b);

        OLED_DrawPoint(x + b, y + a);

        OLED_DrawPoint(x + b, y - a);

        OLED_DrawPoint(x - b, y - a);

        OLED_DrawPoint(x - b, y + a);

        a++;

        num = (a * a + b * b) - r*r;//計算畫的點離圓心的距離

        if(num > 0)

        {

            b--;

            a--;

        }

    }

}

//在指定位置顯示一個字符,包括部分字符

//x:0~127

//y:0~63

//size:選擇字體 12/16/24

//取模方式 逐列式

void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1)

{

  u8 i,m,temp,size2,chr1;

  u8 y0=y;

  size2=(size1/8+((size1%8)?1:0))*(size1/2);  //得到字體一個字符對應點陣集所占的字節數

  chr1=chr-' ';  //計算偏移后的值

  for(i=0;i<size2;i++)

  {

    if(size1==12)

        {temp=asc2_1206[chr1][i];} //調用1206字體

    else if(size1==16)

        {temp=asc2_1608[chr1][i];} //調用1608字體

    else if(size1==24)

        {temp=asc2_2412[chr1][i];} //調用2412字體

    else return;

        for(m=0;m<8;m++)           //寫入數據

        {

          if(temp&0x80)OLED_DrawPoint(x,y);

          else OLED_ClearPoint(x,y);

          temp<<=1;

          y++;

          if((y-y0)==size1)

          {

            y=y0;

            x++;

            break;

          }

        }

  }

}

//顯示字符串

//x,y:起點坐標

//size1:字體大小

//*chr:字符串起始地址

void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 size1)

{

  while((*chr>=' ')&&(*chr<='~'))//判斷是不是非法字符!

  {

    OLED_ShowChar(x,y,*chr,size1);

    x+=size1/2;

    if(x>128-size1)  //換行

    {

      x=0;

      y+=2;

    }

    chr++;

  }

}

//m^n

u32 OLED_Pow(u8 m,u8 n)

{

  u32 result=1;

  while(n--)

  {

    result*=m;

  }

  return result;

}

////顯示2個數字

////x,y :起點坐標

////len :數字的位數

////size:字體大小

void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1)

{

  u8 t,temp;

  for(t=0;t<len;t++)

  {

    temp=(num/OLED_Pow(10,len-t-1))%10;

      if(temp==0)

      {

        OLED_ShowChar(x+(size1/2)*t,y,'0',size1);

      }

      else

      {

        OLED_ShowChar(x+(size1/2)*t,y,temp+'0',size1);

      }

  }

}

//顯示漢字

//x,y:起點坐標

//num:漢字對應的序號

//取模方式 列行式

void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1)

{

  u8 i,m,n=0,temp,chr1;

  u8 x0=x,y0=y;

  u8 size3=size1/8;

  while(size3--)

  {

    chr1=num*size1/8+n;

    n++;

      for(i=0;i<size1;i++)

      {

        if(size1==16)

            {temp=Hzk1[chr1][i];}//調用16*16字體

        else if(size1==24)

            {temp=Hzk2[chr1][i];}//調用24*24字體

        else if(size1==32)

            {temp=Hzk3[chr1][i];}//調用32*32字體

        else if(size1==64)

            {temp=Hzk4[chr1][i];}//調用64*64字體

        else return;

            for(m=0;m<8;m++)

              {

                if(temp&0x01)OLED_DrawPoint(x,y);

                else OLED_ClearPoint(x,y);

                temp>>=1;

                y++;

              }

              x++;

              if((x-x0)==size1)

              {x=x0;y0=y0+8;}

              y=y0;

       }

  }

}

//num 顯示漢字的個數

//space 每一遍顯示的間隔

void OLED_ScrollDisplay(u8 num,u8 space)

{

  u8 i,n,t=0,m=0,r;

  while(1)

  {

    if(m==0)

    {

      OLED_ShowChinese(128,24,t,16); //寫入一個漢字保存在OLED_GRAM[][]數組中

      t++;

    }

    if(t==num)

      {

        for(r=0;r<16*space;r++)      //顯示間隔

         {

          for(i=0;i<144;i++)

            {

              for(n=0;n<8;n++)

              {

                OLED_GRAM[i-1][n]=OLED_GRAM[i][n];

              }

            }

           OLED_Refresh();

         }

        t=0;

      }

    m++;

    if(m==16){m=0;}

    for(i=0;i<144;i++)   //實現左移

    {

      for(n=0;n<8;n++)

      {

        OLED_GRAM[i-1][n]=OLED_GRAM[i][n];

      }

    }

    OLED_Refresh();

  }

}

//配置寫入數據的起始位置

void OLED_WR_BP(u8 x,u8 y)

{

  OLED_WR_Byte(0xb0+y,OLED_CMD);//設置行起始地址

  OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);

  OLED_WR_Byte((x&0x0f),OLED_CMD);

}

//x0,y0：起點坐標

//x1,y1：終點坐標

//BMP[]：要寫入的圖片數組

void OLED_ShowPicture(u8 x0,u8 y0,u8 x1,u8 y1,u8 BMP[])

{

  u32 j=0;

  u8 x=0,y=0;

  if(y%8==0)y=0;

  else y+=1;

  for(y=y0;y<y1;y++)

   {

     OLED_WR_BP(x0,y);

     for(x=x0;x<x1;x++)

     {

       OLED_WR_Byte(BMP[j],OLED_DATA);

       j++;

     }

   }

}

//OLED的初始化

void OLED_Init(void)

{

  oled_ccc.OLED_SCLK = rt_pin_get("PA.3");

  oled_ccc.OLED_SDIN = rt_pin_get("PA.4");

  oled_ccc.OLED_RST = rt_pin_get("PF.1");

  oled_ccc.OLED_DC = rt_pin_get("PB.0");

  oled_ccc.OLED_CS = rt_pin_get("PA.5");

  rt_pin_mode(oled_ccc.OLED_SCLK, PIN_MODE_OUTPUT);

  rt_pin_mode(oled_ccc.OLED_SDIN, PIN_MODE_OUTPUT);

  rt_pin_mode(oled_ccc.OLED_RST, PIN_MODE_OUTPUT);

  rt_pin_mode(oled_ccc.OLED_DC, PIN_MODE_OUTPUT);

  rt_pin_mode(oled_ccc.OLED_CS, PIN_MODE_OUTPUT);

  rt_pin_write(oled_ccc.OLED_SCLK, PIN_HIGH);

  rt_pin_write(oled_ccc.OLED_SDIN, PIN_HIGH);

  rt_pin_write(oled_ccc.OLED_RST, PIN_HIGH);

  rt_pin_write(oled_ccc.OLED_DC, PIN_HIGH);

  rt_pin_write(oled_ccc.OLED_CS, PIN_HIGH);

  OLED_RST_Clr();//復位

  rt_thread_mdelay(200);

  OLED_RST_Set();

  OLED_WR_Byte(0xAE,OLED_CMD);//--turn off oled panel

  OLED_WR_Byte(0x00,OLED_CMD);//---set low column address

  OLED_WR_Byte(0x10,OLED_CMD);//---set high column address

  OLED_WR_Byte(0x40,OLED_CMD);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)

  OLED_WR_Byte(0x81,OLED_CMD);//--set contrast control register

  OLED_WR_Byte(0xCF,OLED_CMD);// Set SEG Output Current Brightness

  OLED_WR_Byte(0xA1,OLED_CMD);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常

  OLED_WR_Byte(0xC8,OLED_CMD);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常

  OLED_WR_Byte(0xA6,OLED_CMD);//--set normal display

  OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)

  OLED_WR_Byte(0x3f,OLED_CMD);//--1/64 duty

  OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset Shift Mapping RAM Counter (0x00~0x3F)

  OLED_WR_Byte(0x00,OLED_CMD);//-not offset

  OLED_WR_Byte(0xd5,OLED_CMD);//--set display clock divide ratio/oscillator frequency

  OLED_WR_Byte(0x80,OLED_CMD);//--set divide ratio, Set Clock as 100 Frames/Sec

  OLED_WR_Byte(0xD9,OLED_CMD);//--set pre-charge period

  OLED_WR_Byte(0xF1,OLED_CMD);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock

  OLED_WR_Byte(0xDA,OLED_CMD);//--set com pins hardware configuration

  OLED_WR_Byte(0x12,OLED_CMD);

  OLED_WR_Byte(0xDB,OLED_CMD);//--set vcomh

  OLED_WR_Byte(0x40,OLED_CMD);//Set VCOM Deselect Level

  OLED_WR_Byte(0x20,OLED_CMD);//-Set Page Addressing Mode (0x00/0x01/0x02)

  OLED_WR_Byte(0x02,OLED_CMD);//

  OLED_WR_Byte(0x8D,OLED_CMD);//--set Charge Pump enable/disable

  OLED_WR_Byte(0x14,OLED_CMD);//--set(0x10) disable

  OLED_WR_Byte(0xA4,OLED_CMD);// Disable Entire Display On (0xa4/0xa5)

  OLED_WR_Byte(0xA6,OLED_CMD);// Disable Inverse Display On (0xa6/a7)

  OLED_WR_Byte(0xAF,OLED_CMD);

  OLED_Clear();

}

演示視頻：