| Number of channels (#) | 4 |
| Output type | Open-collector, Open-drain |
| Propagation delay time (μs) | 1.3 |
| Vs (Max) (V) | 36 |
| Vs (Min) (V) | 2 |
| Vos (offset voltage @ 25 C) (Max) (mV) | 2 |
| Iq per channel (Typ) (mA) | 0.2 |
| Input bias current (+/-) (Max) (nA) | 25 |
| Rail-to-rail | Out |
| Rating | Space |
| Operating temperature range (C) | -55 to 125 |
| VICR (Max) (V) | 34.5 |
| VICR (Min) (V) | 0 |
- QML-V Qualified, SMD 5962-7700801VCA, 5962-9673802VCA
and 5962-9673802V9B - Rad-Tolerant: 40 kRad/sec (Si) TID
(5962-9673802VCA and 5962-9673802V9B)(1)- TID Dose Rate = 0.01 rad/sec (Si)
- Wide Supply Ranges
- Single Supply: 2 V to 36 V
(Tested to 30 V) - Dual Supplies: ±1 V to ±18 V
(Tested to ±15 V)
- Single Supply: 2 V to 36 V
- Low Supply-Current Drain Independent of Supply Voltage:
0.8 mA (Typ) - Low Input Bias Current: 25 nA (Typ)
- Low Input Offset Current: 3 nA (Typ) (LM139)
- Low Input Offset Voltage: 2 mV (Typ)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to Maximum-Rated
Supply Voltage: ±36 V - Low Output Saturation Voltage
- Output Compatible With TTL, MOS, and CMOS
(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 0.01 rad/sec. Radiation lot acceptance testing is available - contact factory for details.
These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2?V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to 125°C.
