Introduction

Microsoft Windows operating systems (Windows 98 and later) include native support for devices and systems that comply with the Universal Serial Bus (USB) specification. This article provides answers to frequently asked questions from driver developers who need intermediate level details about the USB stack and features supported in USB.

This particular FAQ is for developers who are knowledgeable about USB and writing USB drivers that work with Windows operating systems.

Unless otherwise specified, the information in this paper pertains to Windows 2000 and later operating systems.

Additional documentation for USB device and driver support is available in the current version of the Windows Driver Development Kit (DDK), through the MSDN developer program library, and on USB Architecture and Driver Support.

Windows Support and USB

Is my USB 2.0 hub single-TT or multi-TT?

A USB 2.0 hub can have one transaction translator (TT) for all downstream-facing ports on the hub (single TT), or it can have one TT for each downstream-facing port on the hub (multiple TT).

The value of the bDeviceProtocol field of the USB device descriptor and the bInterfaceProtocol field in the USB interface descriptor indicate whether a hub is single-TT or multi-TT:

The driver Usbhub.sys uses this setting to enable multi-TT mode or single-TT mode. On Windows XP and later operating systems, Usbhub.sys always enables multi-TT mode on a multi-TT hub.

For additional details about TT layout, see Sections 11.14.1.3 and 11.23.1 of the USB 2.0 specification, which is available from the USB website at http://www.usb.org/developers/docs?.

What characters or bytes are valid in a USB serial number?

A USB device has two choices for storing serial numbers in the iSerialNumber field (in the USB device descriptor):

If the device has a serial number, Microsoft requires that the serial number uniquely identify each instance of the same device. For example, if two device descriptors have identical values for the idVendor, idProduct, and bcdDevice fields, the iSerialNumber field will distinguish one from the other.

Windows Plug and Play requires that serial numbers across multiple buses follow specified rules. Every byte in a USB serial number is checked for correctness. If a single invalid byte is found, the serial number is discarded and the device is treated as if it had no serial number.

Invalid bytes in serial numbers are indicated below:

For additional details on the iSerialNumber field, see Section 9.6.1 of the USB 2.0 specification, which is available from the USB website at http://www.usb.org/developers/docs?.

What language identifier (LANGID) is used to extract the device's serial number?

A USB device indicates the presence of a serial number by setting the iSerialNumber field of the USB device descriptor to a nonzero value. To retrieve the serial number, Windows issues a string request with the language identifier (LANGID) set to 0x0409 (U.S. English). The LANGID 0x0409 is always used by Windows operating systems, irrespective of the language of the installed version of Windows.

What language identifier (LANGID) is used in a string request on a localized build of Windows?

On a localized build of Windows, the string request sent to the device contains the language identifier (LANGID) of the user’s context. If the device does not support that LANGID, the operating system will reissue the string request in U.S. English (LANGID = 0x0409).

Does IsDeviceHighSpeed() indicate if the device is capable of Hi-Speed or if it is even connected to an EHCI host controller?

The function IsDeviceHighSpeed() returns the actual operational mode of the device in its current tree topology. If a USB Hi-Speed-capable device is connected to a USB 1.1 hub or a full speed host controller, then the function will indicate that the device is working at full speed.

What is the maximum size of USB transfers on various operating systems?

On Microsoft Windows 2000, the maximum size of a USB transfer is determined by the device driver that is loaded for the USB device. The maximum size of USB transfers is determined in one of the following ways:

In most cases, a USB transfer on Windows 2000 has no hard-coded size limit except the limit that is defined by the client driver.

On the Microsoft Windows XP and Microsoft Windows Server 2003 operating systems, the maximum size of a USB transfer is defined either by the miniport driver of the USB host controller or by the USB port driver (Usbport.sys). The maximum size of a USB transfer is not defined by the client driver of the device.

If you use more than the maximum size of a USB transfer, the transfer request may fail, or a stop error may appear on a blue screen.

On Windows XP and Windows Server 2003, when the maximum size of a transfer for a bulk endpoint is less than or equal to 4 KB, the port driver splits the transaction into multiple transfers. Theoretically, this behavior makes the maximum size of a USB transfer unlimited for these endpoints.

For additional information, please refer to Microsoft Knowledge Base article 832430.

Does Windows have requirements or guidelines for assigning numbers to multiple interfaces on a composite device?

A USB device with more than one interface on the first configuration is treated as a composite device. Windows XP (prior to Service Pack 2) mandates that interface numbers follow these rules:

Windows XP Service Pack 2 (SP2) relaxed the requirement that interface numbers be consecutive by making changes to the driver Usbccgp.sys. Beginning with SP2, interface numbers need only be increasing.

For additional information about interface numbers, see Microsoft Knowledge Base article 814560.

Windows has provided support for USB composite devices since Windows 98. The driver Usbhub.sys supports composite devices on the following operating systems:

For additional information on alternate settings, see Section 9.6.5 of the USB 2.0 specification, which is available from the USB Web site at http://www.usb.org/developers/docs?.

What driver should a USB composite device load?

Windows has provided support for USB composite devices since Windows 98. The driver Usbhub.sys supports composite devices on the following operating systems:

A newer driver for composite devices, Usbccgp.sys, was released with Windows Millennium Edition (Me). Although it may still be possible to load Usbhub.sys as the parent driver for the composite device, we do not recommend it.

If you are developing drivers, you should ensure that the correct driver is loaded on the operating system for your composite device. You can do so by using the Include and Needs directives in your information file (.inf).

Include = USB.INF

Needs = Composite.Dev

An information file that incorrectly refers to Usbhub.sys as the composite device driver may, in the future, fail hardware compatibility testing.

For additional information, see the USB composite driver documentation in the Windows XP DDK or Windows Server 2003 DDK.

How do I enable debugging for USB core binaries?

Table 1. Kernel debug settings, Windows 2000

Table 2. Kernel debug settings, Windows XP and Windows Server 2003

Module name	Debug symbol	Range
Usbport.sys	USBPORT_Debug_Trace_Level	0-4
Usbccgp.sys	DbgVerbose	0-1
Usbhub.sys	USBH_Debug_Trace_Level	0-3
Usbd.sys	USBD_Debug_Trace_Level	0-3

For additional information about USB core stack debugging, see Microsoft Knowledge Base article 314743.

What does bugcheck 0xFE mean on Windows XP and Windows Server 2003?

Windows XP SP1 and later operating systems provide a new bugcheck specific to USB. On a severe error, bugcheck 0xFE is generated by the USB stack to aid in quickly identifying the root cause.

Bugcheck 0xFE has four parameters. The first parameter indicates the type of error and determines how you should interpret the remaining three parameters, as shown in Table 3.

Table 3. Parameters for bugcheck 0xFE

Value of parameter 1	Meaning
INTERNAL_ERROR (0x01)	An internal error occurred in the USB stack. The Microsoft USB team must obtain the exact repro hardware to investigate the issue.
BAD_URB (0x02)	The USB client driver has submitted a USB request block (URB) that is still attached to another I/O request packet (IRP) that is still pending in the bus driver. This is the most common hardware error. USB Verifier will help identify and catch these issues. ? Parameter 2 is the IRP that is currently pending in Usbport.sys. ? ? Parameter 3 is a pointer to the "newest IRP," the IRP that is currently being submitted by the client. ? ? Parameter 4 is a pointer to the URB that is attached to both IRPs.
MINIPORT_ERROR (0x03)	The miniport driver has generated a bugcheck. This error is usually caused by a catastrophic hardware (host controller) failure.
IRP_URB_DOUBLE_SUBMIT (0x04)	The client driver submitted an IRP that is already pending in the bus driver. This is a common hardware error. This error can also be detected by Driver Verifier when the Cancel routine is set by Usbport.sys for the transfer. Parameter 2 is the address of the IRP that is being submitted. Parameter 3 is the address of the URB that is attached to the IRP. Parameter 4 not used. Its value is always zero.

For additional information about USB core stack debugging, see the latest Windows DDK and the kernel debugger documentation.

What features of the USB EHCI specification are not yet implemented?

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI) specification, but there are a few features that are not implemented. These features may be supported in future releases:

?	Features added to EHCI in or after version 0.95. ? Rebalance Lockout (I-Bit) ? ? Frame Span Traversal Nodes (FSTN)
?	64-bit host controller addressing support. EHCI controller can still work in 32-bit mode on an x64 or Intel Itanium platform. ?
?	Kernel Debugging over USB 2.0. ?
?	EHCI BIOS handoff. ? BIOS vendors should support the EHCI BIOS handoff section in the EHCI Specification for all EHCI-aware BIOS ? ? Preliminary support for EHCI BIOS handoff will be available in Windows XP SP2. The Windows core team for USB would like to work with OEM partners and BIOS vendors to develop this functionality.

What are the major restrictions imposed by Usbccgp.sys?

Here are the major restrictions imposed on hardware devices and drivers by Usbccgp.sys:

?	Usbccgp supports only the default configuration (config0). ?
?	There is currently no support for Selective Suspend in Usbccgp. This feature may be supported in future versions of Windows. ?
?	The interface association descriptor (IAD) in Usbccgp is supported only in Windows XP SP2 and Windows Server 2003 SP1 and later. ?
?	Nonconsecutive interface numbers are supported only in Windows XP SP2 and Windows Server 2003 SP1 and later.

Does Microsoft support the IAD in Windows XP?

Yes. The recent USB 2.0 IAD Engineering Change Notification (ECN) introduced a new standard method in the USB device framework for describing a grouping of interfaces and their alternate settings within a function. IAD can now be used to identify two or more consecutive interfaces and alternate settings within one function.

?	Windows XP SP2 ?
?	Windows Server 2003 SP1 ?
?	Windows Vista

For additional information on IAD, see Support for USB Interface Association Descriptor in Windows.

Does the USB stack handle chained memory descriptor lists (MDLs) in a USB Request Block (URB)?

No. This functionality is not supported in the USB stack.

Can a driver have more than one USB request block (URB) in one I/O request packet (IRP)?

No. This functionality is not supported in the USB stack.

Microsoft OS Descriptor

What is the Microsoft OS Descriptor?

The Microsoft OS descriptor is a set of data structures that IHVs can use to include extra information in device firmware, information that Microsoft OS descriptor-enabled applications and operating systems can extract. The data is extracted by vendor-specific USB requests to the device as indicated in the OS Descriptor specification. The information retrieved will provide the operating system and/or applications with additional information about the device and its special features.

?	One Microsoft OS string descriptor ?
?	One or more Microsoft OS feature descriptors

The Microsoft OS string descriptor is a special string that is embedded at a fixed string index. The string descriptor informs the operating system of the presence of one or more Microsoft OS feature descriptors, along with details on how to extract these descriptors.

The Microsoft OS feature descriptors use a fixed format defined by Microsoft.

For additional information about the Microsoft OS descriptors, please visit USB Architecture and Driver Support.

What operating systems support Microsoft OS descriptors?

?	Windows XP (starting with SP1) ?
?	Windows Server 2003 ?
?	Windows Vista

Why does Windows XP issue a string descriptor request to index 0xEE?

If a device contains information about itself in a Microsoft OS descriptor, the device must have a Microsoft OS string descriptor located at string index 0xEE. The string descriptor will contain an embedded signature field that differentiates it from other strings, as well as an embedded version number so the descriptor can be distinguished from later updates.

Windows operating systems that support the Microsoft OS descriptor (like Windows XP SP1) issue a string descriptor request to index 0xEE to determine whether the device contains a Microsoft OS descriptor and if so, how to extract and interpret the information contained in the Microsoft OS feature descriptors.

To retrieve the information stored in the string descriptor, a standard GET_DESCRIPTOR request must be issued to the device. The format of the request is shown in Table 4.

Table 4. Standard GET_DESCRIPTOR String Request

bmRequestType	bRequest	wValue	wIndex	wLength	Data
100 0000B	GET_DESCRIPTOR	0x03EE	0x0000	0x12	Returns the string

If a device does not have a valid string descriptor at index 0xEE, the device will respond with a request error or a stall. For devices that do not respond with a stall, Windows XP will issue a single-ended zero reset to the device to recover the device from an unknown state.

To maintain backwards compatibility, this string request is issued only once to a device that does not contain a Microsoft OS string descriptor.

After the request is sent once to a device, the osvc value of the registry key HLKM\SYSTEM\CurrentControlSet\Control\UsbFlags\VVVVPPPPRRRR is set as shown in Table 5, where:

?	VVVV is idVendor from the device descriptor (in hex format) ?
?	PPPP is idProduct from the device Descriptor (in hex format) ?
?	RRRR is bcdDevice or the revision ID from the device descriptor (in hex format)

Table 5. Possible settings for osvc value

Setting	Meaning
00 00	Device did not provide a valid response to the Microsoft OS string descriptor request.
01 xx	Device provided a valid response to the Microsoft OS string descriptor request, where xx is the bVendorCode contained in the response.

Introduction

Microsoft Windows operating systems (Windows 98 and later) include native support for devices and systems that comply with the Universal Serial Bus (USB) specification. This article provides answers to frequently asked questions from driver developers about the USB stack and features supported in USB.

This FAQ is for developers who are new to developing USB devices and drivers that work with Windows operating systems.

Unless otherwise specified, the information in this paper pertains to Windows 2000 and later operating systems.

Additional documentation for USB device and driver support is available in the current version of the Windows Driver Development Kit (DDK), through the MSDN developer program library, and on USB - Architecture and Driver Support.

Windows Support and USB

Does my PC have USB 2.0 ports?

Most desktop and laptop computers sold after 2002 are USB 2.0 enabled. USB 2.0 enabled means that the computer has one or more USB-enhanced host controllers. To determine if your computer running the Windows XP or Windows Server 2003 operating system has a USB-enhanced host controller, follow these steps:

1. Start Device Manager. To do so, click Start, and then click Run. In the Open box, type devmgmt.msc, and then click OK.

Figure 1. Starting Device Manager

2. In the Device Manager window, expand the Universal Serial Bus controllers node. Look for a host controller with the word "Enhanced" in the title. If you find one, your system has USB 2.0 capable ports and has the necessary host controller drivers.

Figure 2: Enhanced host controller with drivers loaded

3. If you do not find an enhanced host controller in step 2, expand the Other Devices section. Look for Universal Serial Bus (USB) Controller. If you find this item, your system has USB 2.0 capable ports, but you need to install drivers for this host controller. If you do not find this item, your system does not have any USB 2.0 ports.

Figure 3: Enhanced host controller without drivers loaded

Do I need to install drivers for my enhanced (USB 2.0) host controller?

?	Windows 2000 Service Pack 4 (SP4) ?
?	Windows XP SP1 ?
?	Windows Server 2003

Windows 2000 and Windows XP were released before USB 2.0 hardware was available, so the drivers were released for those operating systems in the service packs. To install drivers, follow these steps:

1. Follow the procedure described in the answer to the previous question to verify that your computer has USB 2.0 ports that required you to install a driver for the enhanced host controller.

2. In the Device Manager window, expand the Other Devices section as explained under the previous question, and then double-click Universal Serial Bus (USB) Controller.

3. On the General tab of the Properties dialog box, click Reinstall Driver.

Figure 4. Properties window for EHCI with no drivers

4. In the Add New Hardware Wizard, select Install the software automatically (Recommended), and then click Next. Continue with the wizard, accepting all default options, until you reach the last page of the wizard, and then click Finish. You may have to restart your computer to finish the installation.

For additional information about the availability of USB 2.0 in Windows XP SP1, see Microsoft Knowledge Base article 329632.

Note
Visit Windows Update regularly to ensure that you have the latest updates installed on your machine.

Is an update for USB on Windows XP available on Windows Update?

Windows XP SP1 and later service packs contain support for USB 1.1 and USB 2.0. SP1a is available at http://www.microsoft.com/windowsxp/pro/downloads/servicepacks/sp1/default.asp

?	Power management. Fixes issues around Selective Suspend and system power management, especially resume from S3 and S4. ?
?	CPU utilization. Improves algorithms to reduce CPU utilization during large isochronous and bulk USB transfers. ?
?	Isochronous support. Improved support for Hi-Speed isochronous cameras and periodic isochronous devices.

You do not need to install Windows XP SP1a if you have installed Windows XP SP2 or Windows Server 2003 SP1. If the service pack was installed by the computer manufacturer, it will not appear in Windows Update.

For additional information on the Windows XP SP1 update for USB 1.1 and 2.0, see Microsoft Knowledge Base article 822603.

Is there a difference between a "Hi-Speed USB 2.0 device" and a "USB 2.0 device"?

?	Low speed, up to 1.5 Mbps ?
?	Full speed, up to 12 Mbps ?
?	Hi-Speed, up to 480 Mbps

Although low speed and full speed existed in the USB 1.1 specification, the USB 2.0 specification added Hi-Speed while maintaining support for low speed and full speed.

Why do I see several host controllers on my system?

There are three specifications for USB host controllers. Most host controllers found in PCs are compliant with one of these specifications; however, each specification is meant to support only a subset of USB 2.0 device speeds, as summarized in Table 1.

Table 1: Host Controllers and Device Speeds Supported

Type of Host Controller	USB Device Speeds Supported
USB Enhanced Host Controller (EHCI)	Hi-Speed
USB Universal Host Controller (UHCI)	Full speed and low speed
USB Open Host Controller (OHCI)	Full speed and low speed

Motherboards that support USB 2.0 must have at least one USB enhanced host controller and usually one or more UHCI or OHCI controllers to support full speed and low speed devices.

IHVs must test their devices on all host controller standards and hubs to ensure compatibility.

Can I disable the "HI-SPEED USB Device plugged into non-HI-SPEED port" notice in XP?

Windows XP and Windows Server 2003 create a pop-up notice when a Hi-Speed USB 2.0 device is plugged into a USB port that does not support Hi-Speed. To get the fastest performance from the device, the user must click the notice and follow the instructions on the screen.

1.	Start Device Manager. To do so, click Start, and then click Run. In the Open box, type devmgmt.msc, and then click OK. ?
2.	In the Device Manager window, expand the Universal Serial Bus controllers node. Look for a host controller with the word "Universal" or "Open" in the title. If you find one, double-click it. ?
3.	On the Advanced tab of the Properties dialog box, check the Don't tell me about USB errors checkbox.

Note
Following this procedure will disable all USB notices, not just "HI-SPEED USB Device plugged into non-HI-SPEED port."

The best way to prevent this notice from appearing is by installing a USB 2.0 hub that is Hi-Speed certified or by purchasing a USB 2.0 EHCI peripheral component interconnect (PCI) add-in card. You can then attach your Hi-Speed USB 2.0 device to these Hi-Speed enabled ports. Most systems sold since 2003 already have USB 2.0 Hi-Speed enabled ports.

For additional information about USB 2.0 support in Windows XP SP1, see Microsoft Knowledge Base article 329632.

What are acceptable values for the bcdUSB field?

The bcdUSB field in the standard device descriptor must accurately report the USB specification release number that the device and its descriptors are compliant with.

?	0x0100 (USB 1.0) ?
?	0x0110 (USB 1.1) ?
?	0x0200 (USB 2.0)

Failure to correctly report these values can cause a device to fail tests in the USB test tools available on http://www.microsoft.com/whdc/whql/device/usb.mspx.

Note
All USB hubs must be compliant with USB 1.1 or later. They should not report 0x0100 in the bcdUSB field.

Is it possible to have a composite and a compound device in one piece of hardware?

Yes. The Microsoft Natural Keyboard Pro, which has a three-port, bus-powered hub, is an example of a compound multifunction USB device that has a composite device attached to port 1. Two additional ports are exposed to the end user.

The device attached to port 1 is a low-speed composite device. The device has two interfaces, both of which conform to the USB standard device class definition for human interface devices (HID). The composite device provides two HID interfaces instead of multiplexing all collections over a single HID interface using top-level collections. This design was chosen for compatibility with older BIOSs.

Why are some of my USB devices reinstalled when they are moved to a new USB port?

In Windows 2000 and later operating systems, a new physical device object (PDO) is created when a device (for example, a USB or PCMCIA device) is moved from one port to another. A new PDO is not created if the hardware reports a unique USB serial number.

To reuse the same PDO and to ensure that the device experience is unchanged whether the device is reinserted into the same port or a new port, hardware vendors must store a serial number on their device. According to the requirements of the "Designed for Windows" logo program, the serial number must be unique for all devices that share the same device installation identifier.

Is there a list of design recommendations for high-speed product packaging?

The USB-IF has worked with Microsoft and other USB-IF member companies to develop a list of recommendations for independent hardware vendors to include on their packaging. More information is available on the USB website at http://www.usb.org/developers/packaging/?.

How do I identify the driver versions of USB core stack?

1.	Start My Computer, and then go to the folder %windir%\system32\drivers. ?
2.	Right-click the USB driver file you want to know about, and then click Properties. ?
3.	The version number of the file is shown on the Version tab.

The following is a list of core USB drivers on Windows XP:

?	Usbport.sys ?
?	Usbhub.sys ?
?	Usbehci.sys ?
?	Usbuhci.sys ?
?	Ushohci.sys ?
?	Usbccgp.sys

For additional information on each driver, see the Windows DDK.

Where can I find additional FAQs on USB?

See the USB-IF FAQ page at http://www.usb.org/developers/usbfaq/?.

USB Class Drivers

Which USB DWG Classes are supported by Microsoft?

Windows supports a number of USB classes that are defined by the USB Device Working Group (DWG). For the current list of USB class specifications and class codes, visit the USB DWG Web site at http://www.usb.org/developers/devclass_docs?

Table 2 highlights the USB DWG classes supported in Windows and also identifies the initial version of Windows in which support for the class was introduced.

Table 2: USB DWG Class support in Windows

Class Specification	bDeviceClass Code	Driver Name	Minimum OS Support
Bluetooth class	0xE0	Bthusb.sys	Windows XP
Chip/smart card interface devices (CCID)	0x0B	Usbccid.sys	Windows Server 2003* Windows XP* Windows 2000*
Hub class	0x09	Usbhub.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me Windows 98 SE Windows 98
Human interface device (HID)	0x03	Hidusb.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me Windows 98 SE Windows 98
Mass storage class (MSC)	0x08	Usbstor.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me
Printing class	0x07	Usbprint.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me Windows 98 SE Windows 98
Scanning/imaging (PTP)	0x06	Usbscan.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me Windows 98 SE Windows 98
USB Audio class	0x01	Usbaudio.sys	Windows Server 2003 Windows XP Windows 2000 Windows Me Windows 98 SE
Modem class (CDC)	0x02	Usbser.sys	Windows Server 2003 Windows XP Windows 2000
Video class (UVC)	0x0E	Usbvideo.sys	Windows XP*

*Special instructions are necessary to load this driver because it may have been released later than the operating system.

Not all features described in a DWG class specification may be supported by Windows class drivers. For additional details on implemented features within a class specification, see the documentation for the Windows DDK.

What device setup class should I use for a custom USB device?

Microsoft provides system-defined setup classes for most device types. System-defined setup class GUIDs are defined in Devguid.h. For additional information, see the DDK. If you are developing a device type for which Microsoft has not provided an existing class GUID, then you can define a new device setup class.

The USB team requires IHVs to use the setup class associated with the type of USB device, not with the bus type. The setup class "USB" (ClassGuid = {36fc9e60-c465-11cf-8056-444553540000}) is reserved only for USB host controllers and USB hubs. It must not be used for other device categories. Using this class incorrectly may cause the device driver to fail hardware compatibility testing.

For a list of Windows class GUIDs, see "System-Supplied Device Setup Classes" in the Windows DDK or online at http://msdn2.microsoft.com/en-us/library/ms791134.aspx.

Power Management and USB

Why won't my CPU enter C3 if I attach some USB devices?

When a USB device is attached to a PC, the USB host controller polls the frame scheduler in memory. This is a direct memory access (DMA) bus master operation. Any bus master traffic, interrupt, or one of several other system activities are "break events" that will move a CPU out of C3 because, by definition, the CPU's cache cannot be snooped while in C3.

?

Hardware removal. In some cases it may be possible for the hardware to be electronically disconnected from the universal serial bus. For example, when storage media is removed from the USB reader, the USB reader can emulate an electronic disconnect and reconnect when the media is reinserted. In this case, the universal serial bus will not prevent C3 transitions, because there are no USB devices on the host controller. ?

?

Selective Suspend. The only alternative available in Windows XP and later operating systems is to support USB Selective Suspend. This feature allows a driver to suspend the USB device it controls when the device becomes idle, even while the system itself remains in a fully operational power state (S0). Selective Suspend is particularly powerful if all USB function drivers support it. If even one driver does not support it, the CPU will be kept out of C3. For additional information on Selective Suspend, see the Driver Development Kit.

Which USB class drivers support Selective Suspend in Windows XP and Windows Server 2003?

?	Usbhub.sys. This driver can selectively suspend a root or external hub when no devices are attached to it or when all devices attached to that hub can be selectively suspended. ?
?	Hidusb.sys. This driver can selectively suspend a HID device. It is your responsibility to trigger remote wake signaling on all device state changes. To enable Selective Suspend in the HID stack, the registry value SelectiveSuspendEnabled must be enabled for the specific VID+PID of the device. For examples, see Input.inf. ?
?	Bthusb.sys. This driver can selectively suspend devices on computers running Windows XP SP2 and later. The driver requires the Bluetooth radio to set the self-powered and remote wake bits in the configuration descriptor. The driver selectively suspends the Bluetooth radio when there are no active Bluetooth connections. ?
?	Usbser.sys. This driver can selectively suspend when there are no active modem connections.

If enough OEMs ask for it, Microsoft may consider supporting Selective Suspend for additional class drivers. Work is also being investigated on future hardware architectures (CPUs, chipsets, and the operating system) to mitigate the problems.

Why can't Windows XP be awakened from S3 by using a USB HID (keyboard/mouse) when it can be awakened from S1?

There are a number of reasons that a PC cannot be awakened by a USB device from S3. Some of them are listed below:

?	Incorrect BIOS. Verify that you have the latest BIOS installed on the computer. To get the latest BIOS revision for your computer, visit the website of the OEM or ODM. ?
?	BIOS not enabled to wake. Some BIOSs make it possible to disable wake from S3 and S4. Verify that the BIOS is enabled to wake from S3. ?
?	USBBIOSx registry not set. A clean install of Windows XP will not have the USBBIOSx registry key. If the OEM or ODM has validated that the BIOS is capable of waking from S3, you need to set this registry key to 0x00 and restart the computer.

For additional information, see the USB troubleshooter in the Windows XP Help and Support Center.

閱讀全文

• 常見問題(6583) 常見問題(6583)

點贊 收藏

掃一掃，分享給好友

復制鏈接分享

聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。 舉報投訴

相關推薦

USB Type-C/PD常見問題全面答疑（附參考設計）

USB Type-C/PD 常見問題全面答疑繼續！接下來，我們將帶您了解賽普拉斯 CCGx 相關的參考設計和套件。

2017-09-11 17:24:5321344

USB Type-C/PD 常見問題

致力于為您解決USB Type-C/PD 常見問題！賽普拉斯CCGx解決方案的固件編程/升級有哪些方法？在產品量產或研發過程中,CCGx控制器能否使用自定義固件編程？今天我們就EZ-PD CCGx 產品編程這一主題為您全面答疑！

2017-09-19 18:04:4414300

C語言常見問題

C語言常見問題匯總大集合

2017-05-10 21:37:07

C語言常見問題集

C語言常見問題集，即C-FAQ。

2013-07-09 08:40:33

C語言常見問題集

RT，從別處轉載過來，作為回報論壇，給大家分享，希望可以幫助大家，個人真心感覺寫得很好C語言常見問題集.pdf (1.24 MB )

2019-10-22 03:47:14

C語言常見問題！

C語言常見問題！

2020-05-26 11:53:09

EMI/EMC設計常見問題有哪些?

EMI/EMC設計常見問題有哪些?

2021-11-10 07:23:21

FIFO的具體設計和常見問題

FIFO的具體設計和常見問題

2021-01-06 06:04:20

FPGA邏輯設計中的常見問題有哪些

圖像采集系統的結構及工作原理是什么FPGA邏輯設計中的常見問題有哪些

2021-04-29 06:18:07

Keil編譯常見問題

Keil編譯常見問題

2018-01-26 14:08:55

LED燈具產品商檢常見問題分析

LED燈具產品商檢常見問題分析

2012-08-16 16:23:43

Linux的常見問題解答和管理技巧

Linux的常見問題解答和管理技巧

2012-08-19 14:45:52

LoRa技術的常見問題

LoRa設計10問引言：近 5 年來，LoRa技術在國內受重視，從高校到企業，再到自主創業者，都在了解和研究。作為從事 LoRa 研發 5年，推出完整 LoRa 物聯網的銳米通信，接觸許多問詢 LoRa 技術的客戶。為此，我們解釋一些 LoRa 技術的常見問題...

2021-07-27 07:45:30

NIOS II 常見問題總結

NIOS II 常見問題總結

2012-08-12 15:16:16

PADS常見問題總結

PADS常見問題，幫助你理解那些困擾你的琳琳碎碎。

2012-11-06 15:18:45

PCB設計常見問題

pcb設計常見問題，供參考。

2012-08-14 23:32:09

PCB設計常見問題有哪些

PCB設計常見問題有哪些

2021-04-25 08:30:34

PC電源常見問題匯總

PC電源常見問題匯總，分享！

2014-04-29 16:03:56

PLL常見問題解答

PLL常見問題解答

2012-08-12 13:24:15

PROTEL應用常見問題及問答集

PROTEL應用常見問題及問答集

2012-08-04 16:31:10

Protel使用中的常見問題及解答

Protel使用中的常見問題及解答

2012-04-14 09:27:36

Proteus常見問題精華集錦

本帖最后由 eehome 于 2013-1-5 10:11 編輯 Proteus常見問題精華集錦

2012-08-20 23:16:05

Proteus常見問題集

Proteus常見問題集

2012-08-20 18:25:44

RF電路設計的常見問題有哪些？

RF電路設計的常見問題有哪些？RF電路設計原則及方案是什么？

2021-05-07 06:54:19

SMT貼片加工生產資料的常見問題

`請問SMT貼片加工生產資料的常見問題有哪些？`

2020-03-25 17:03:45

STM32常見問題有哪些？怎么解決這些問題？

STM32常見問題有哪些？如何解決STM32單片機常見問題？

2021-04-19 06:39:20

STM32中串口的一些常見問題有哪些？

STM32中串口的一些常見問題有哪些？

2022-02-18 08:00:00

labview入門常見問題解答

labview入門常見問題解答

2013-06-20 11:09:05

pads常見問題

pads常見問題

2012-08-20 13:09:26

protel初中級用戶常見問題

protel初中級用戶常見問題

2012-08-20 20:40:06

sqlserver常見問題解析

sqlserver常見問題及解釋

2019-10-12 15:13:43

　經驗談：視頻監控常見問題和解決辦法

視頻監控有哪些常見問題？如何去解決這些問題？

2021-06-01 06:08:12

交流伺服電機飛車常見問題有哪些解決辦法？

交流伺服電機飛車常見問題有哪些解決辦法？

2021-09-26 09:08:17

伺服電機使用的常見問題

的周期、更高的生產率、更好的可靠性和更長的壽命。為了實現伺服電機的更好性能，就必須對伺服電機的一些使用特點有所了解。本文將淺析伺服電機在使用中的常見問題。

2020-05-13 07:56:34

使用VHDL語言設計FPGA有哪些常見問題？

請問使用VHDL語言設計FPGA有哪些常見問題？

2021-05-06 09:05:31

使用keil5常見問題有哪些？如何解決這些問題？

使用keil5常見問題有哪些？如何解決這些問題？

2021-11-30 06:51:09

關于stm32浮點數常見問題分享不看肯定后悔

關于stm32浮點數常見問題分享不看肯定后悔

2021-10-21 08:08:25

寫STM32串口配置代碼常見問題是什么？

寫STM32串口配置代碼常見問題是什么？

2021-11-18 07:39:55

變壓器常見問題

變壓器常見問題

2012-08-13 14:52:20

如何解決stm32cubemx虛擬串口的常見問題？

如何解決stm32cubemx虛擬串口的常見問題？

2022-02-22 06:58:17

如何調試LCD Mipi？調試LCD Mipi常見問題有哪些？

如何調試LCD Mipi？調試LCD Mipi常見問題有哪些？

2022-03-10 09:33:09

嵌入式開發中的常見問題

嵌入式開發中的常見問題小總結

2021-02-25 07:49:27

步進驅動系統的常見問題

步進驅動系統的常見問題

2012-09-24 21:42:58

電池驅動調試常見問題有哪些？怎么解決？

Android電池服務如何啟動？是怎么運行的？電池驅動調試常見問題有哪些？怎么解決？

2021-09-26 06:07:59

電腦常見問題與故障1000例

電腦常見問題與故障1000例

2012-12-16 16:31:56

電路線路板常見問題有哪些？

電路線路板常見問題有哪些？

2021-04-26 06:32:41

直流無刷電機控制相關的常見問題有哪些？

直流無刷電機控制相關的常見問題有哪些？

2021-09-24 08:23:36

網絡基礎集(解決上網常見問題)

網絡基礎集(解決上網常見問題)

2009-06-11 15:37:25

英飛凌IGBT應用常見問題解答

[tr][td]英飛凌IGBT應用常見問題解答1.IGBT模塊適用于哪些產品？2.Easy系列模塊電壓/電流/功率范圍？3.Easy系列有哪幾種封裝？........總共23個問題，，已經有此資料

2018-12-13 17:16:13

請教protel存在的常見問題

請教protel存在的常見問題

2012-05-31 09:24:48

請問一下VHDL編碼中面積優化常見問題是什么？

VHDL編碼中面積優化常見問題是什么？

2021-05-06 08:20:54

誰有PADS的常見問題？

誰有PADS的常見問題？~~借用借用~~呵呵呵

2012-11-25 22:34:46

貼片電阻應用常見問題有哪些？

貼片電阻應用常見問題有哪些？

2021-06-08 06:47:53

隔離、iCoupler技術和iCoupler產品常見問題解答

應用都可以找到合適的iCoupler 產品。 附件是隔離、iCoupler?技術和 iCoupler 產品常見問題解答，歡迎大家下載！附件隔離、iCoupler?技術和iCoupler產品常見問題解答_V2.0.pdf1.5 MB

2018-10-30 09:30:51

高速PCB設計常見問題

高速PCB設計常見問題

2012-09-03 10:34:50

默納克系統常見問題有哪些？

默納克系統常見問題有哪些？如何區分3000與3000new？

2021-11-15 06:00:11

真空斷路器的常見問題及其預防措施的詳細介紹

今天#陜西泰開高壓開關制造有限公司#跟大家分享下；常見故障狀況真空斷路器在真空氣泡終斷掉電總流量并消滅電孤，但真空斷路器本身沒有對真空度特性進行判定定性分析檢驗的機器設備，因此真空降度常見問題是隱伏

2021-03-25 15:10:13

網絡基礎集+解決上網常見問題

網絡基礎集+解決上網常見問題：

2009-06-11 15:15:4725

壓頻轉換器常見問題的解答

壓頻轉換器常見問題的解答:

2009-06-12 15:10:2015

直放站常見問題及分析

直放站常見問題及分析的內容：1、問題的定位及判斷2、室外直放站常見的問題3、室內直放站常見的問題

2009-08-01 08:26:4263

運放使用常見問題精選

運放使用常見問題精選

2010-03-24 11:06:18102

黃菲林的使用及常見問題的解決方法

黃菲林的使用及常見問題的解決方法一,前言:黃菲林是指在透明的聚脂類片材上

2006-04-16 20:57:171242

數碼管常見問題

數碼管常見問題 1、問題： 數碼

2007-12-11 11:31:564168

使用兆歐表時的常見問題

使用兆歐表時的常見問題 1.使用兆歐表測量絕緣電阻時，應該注意哪些事項？

2008-11-23 10:57:251632

電鍍銅的常見問題集

電鍍銅的常見問題集 PCB電鍍中的酸銅電鍍常見問題，主要有以下幾個：電鍍粗糙；電鍍（板面）銅

2009-04-07 22:29:023210

有關USB2.0的常見問題

有關USB2.0的常見問題 Universal Serial Bus (USB)Universal Serial Bus (USB) is a set of connectivity

2009-04-19 21:27:051450

MAX3421E常見問題

摘要：MAX3421E可通過SPI端口為任何系統添加USB主機或外設功能。以下這些常見問題(FAQ)回答了有關MAX3421E基本操作的一些問題。

2009-04-24 17:37:342669

液晶投影儀常見問題

液晶投影儀常見問題

2010-02-06 10:50:51759

NIOS II 常見問題總結

NIOS II 常見問題總結，如果你想要Altera的FPGA做嵌入式設計，肯定要涉及到NIOS II的使用，本文總結了一些NIOS II的常見問題與解決方法

2015-12-01 15:43:3414

Pads鋪銅設置以及常見問題

Pads鋪銅設置以及常見問題。

2016-03-31 16:03:080

Keil編譯常見問題

吳鑒鷹總結的Keil 編譯常見問題，吳鑒鷹總結的Keil 編譯常見問題。

2016-07-22 15:31:1310

AutoCAD應用技巧與常見問題

AutoCAD應用技巧與常見問題，感興趣的小伙伴們可以看一看。

2016-09-18 14:55:040

PROTEL應用常見問題及問答集

PROTEL應用常見問題及問答集，好資料，下來看看。

2017-01-12 12:51:090

Protel使用中的常見問題及解答

Protel使用中的常見問題及解答，下來看看。

2017-01-16 16:36:300

基于495個C語言常見問題集

基于495個C語言常見問題集

2017-10-13 10:18:022

電氣二次常見問題有哪些_40個電氣二次常見問題盤點

本文主要介紹的是電氣二次常見問題，首先介紹了電氣二次原理圖，其次盤點了40個電氣二次常見問題，具體的跟隨小編一起來了解一下。

2018-05-31 16:51:475025

keil編譯有哪些常見問題？

本文檔的主要內容詳細介紹的是keil編譯有哪些常見問題？

2018-08-24 16:04:2317

SMT貼片紅膠常見問題

本視頻主要詳細介紹了SMT貼片紅膠常見問題，分別是推力不夠、膠量不夠或漏點、拉絲。

2019-05-10 16:27:195889

雙絞線傳輸器的常見問題

本文主要闡述了雙絞線傳輸器的常見問題。

2020-01-02 09:33:233901

關于ROM和RAM有哪些常見問題

關于ROM和RAM的常見問題分析。

2020-11-19 15:51:062395

灰塵網絡常見問題

灰塵網絡常見問題

2021-04-28 15:08:588

捷賽自動烹飪鍋使用常見問題及售后

捷賽自動烹飪鍋使用常見問題及售后

2021-07-21 10:11:164

Beonchip微流控芯片的常見問題

本文介紹Beonchip微流控芯片的十大常見問題

2021-09-02 10:39:242217

C語言常見問題

C語言常見問題

2022-03-21 14:57:260

可編程USB轉 UART/I2C Wire常見問題及注意事項

可編程USB轉 UART/I2C /SMBusS/SPI/CAN/1 -Wire適配器USB2S 常見問題及注意事項

2022-08-23 14:38:231101

功率計使用常見問題

電子發燒友網站提供《功率計使用常見問題.pdf》資料免費下載

2022-10-17 11:30:421

數字對講模塊使用常見問題

介紹DMR對講開發中常見問題

2022-10-20 10:24:561

隔離信號和電源的4個常見問題

隔離信號和電源的4個常見問題

2022-10-28 12:00:111

變頻器常見問題匯編

安川變頻器常見問題

2023-06-01 16:53:301

USB 接口電路設計常見問題

USB 接口電路設計常見問題

2023-09-18 10:59:46353

Allegro常見問題點.zip

Allegro常見問題點

2022-12-30 09:19:381

C語言的常見問題集

電子發燒友網站提供《C語言的常見問題集.pdf》資料免費下載

2023-11-18 10:29:210

已全部加載完成