該ADuM31601是USB端口隔離，結合了高速CMOS和單片空芯變壓器技術，這種隔離組件，提供卓越的性能特點，并輕松地以更低和全速USB兼容外設集成。

許多微控制器實現的USB，使其呈現只有D +和D -線路的外部引腳。這是可取的，因為它在很多情況下最大限度地降低外部元件，簡化了設計。USB線之間切換，必須積極推動D + / D -和允許外部電阻設置總線狀態，ADuM3160在提供用于檢測的輸出緩沖器狀態的數據流的方向和控制機制。數據方向是確定一個數據包由包的基礎。

ADuM3160在與使用的內部邏輯結合的邊緣檢測基于iCoupler技術實現一個透明，易于配置，上游面向端口隔離。隔離上游街口提供了簡單的諸多優勢，電源管理。

在隔離了傳播延遲可比一個標準的集線器和電纜。它工作的其中一項從3.0 V至5.5 V電源電壓端，允許連接到VBUSx直接通過內部調節電壓的信號水平。該ADuM3160提供孤立的上拉電阻器控制，使外設控制連接時序。設備消耗的電流足夠低空閑掛起狀態并不是必需的。

The ADuM31601 is a USB port isolator, based on Analog Devices, Inc., iCoupler? technology. Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics and is easily integrated with low and full speed USB-compatible peripheral devices.

Many microcontrollers implement USB so that it presents only the D+ and D? lines to external pins. This is desirable in many cases because it minimizes external components and simplifies the design; however, this presents particular challenges when isolation is required. Because the USB lines must switch between actively driving D+/D? and allowing external resistors to set the state of the bus, the ADuM3160 provides mechanisms for detecting the direction of data flow and control over the state of the output buffers. Data direction is determined on a packet-by-packet basis.

The ADuM3160 uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream-facing port isolator. Isolating the upstream port provides several advantages in simplicity, power management, and robust operation.

The isolator has propagation delay comparable to that of a standard hub and cable. It operates with the supply voltage on either side ranging from 3.0 V to 5.5 V, allowing connection directly to VBUSx by internally regulating the voltage to the signaling level. The ADuM3160 provides isolated control of the pull-up resistor to allow the peripheral to control connection timing. The device draws low enough idle current that a suspend state is not required.

?